Search Linux Wireless

[PATCH 3/3] wifi: ath11k: Add missing hw_ops->get_ring_selector() for IPQ5018

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



During sending data after clients connected, hw_ops->get_ring_selector()
will be called. But for IPQ5018, this member isn't set, and the
following NULL pointer exception will be occurred:

	[   38.840478] 8<--- cut here ---
	[   38.840517] Unable to handle kernel NULL pointer dereference at virtual address 00000000
	...
	[   38.923161] PC is at 0x0
	[   38.927930] LR is at ath11k_dp_tx+0x70/0x730 [ath11k]
	...
	[   39.063264] Process hostapd (pid: 1034, stack limit = 0x801ceb3d)
	[   39.068994] Stack: (0x856a9a68 to 0x856aa000)
	...
	[   39.438467] [<7f323804>] (ath11k_dp_tx [ath11k]) from [<7f314e6c>] (ath11k_mac_op_tx+0x80/0x190 [ath11k])
	[   39.446607] [<7f314e6c>] (ath11k_mac_op_tx [ath11k]) from [<7f17dbe0>] (ieee80211_handle_wake_tx_queue+0x7c/0xc0 [mac80211])
	[   39.456162] [<7f17dbe0>] (ieee80211_handle_wake_tx_queue [mac80211]) from [<7f174450>] (ieee80211_probereq_get+0x584/0x704 [mac80211])
	[   39.467443] [<7f174450>] (ieee80211_probereq_get [mac80211]) from [<7f178c40>] (ieee80211_tx_prepare_skb+0x1f8/0x248 [mac80211])
	[   39.479334] [<7f178c40>] (ieee80211_tx_prepare_skb [mac80211]) from [<7f179e28>] (__ieee80211_subif_start_xmit+0x32c/0x3d4 [mac80211])
	[   39.491053] [<7f179e28>] (__ieee80211_subif_start_xmit [mac80211]) from [<7f17af08>] (ieee80211_tx_control_port+0x19c/0x288 [mac80211])
	[   39.502946] [<7f17af08>] (ieee80211_tx_control_port [mac80211]) from [<7f0fc704>] (nl80211_tx_control_port+0x174/0x1d4 [cfg80211])
	[   39.515017] [<7f0fc704>] (nl80211_tx_control_port [cfg80211]) from [<808ceac4>] (genl_rcv_msg+0x154/0x340)
	[   39.526814] [<808ceac4>] (genl_rcv_msg) from [<808cdb74>] (netlink_rcv_skb+0xb8/0x11c)
	[   39.536446] [<808cdb74>] (netlink_rcv_skb) from [<808ce1d0>] (genl_rcv+0x28/0x34)
	[   39.544344] [<808ce1d0>] (genl_rcv) from [<808cd234>] (netlink_unicast+0x174/0x274)
	[   39.551895] [<808cd234>] (netlink_unicast) from [<808cd510>] (netlink_sendmsg+0x1dc/0x440)
	[   39.559362] [<808cd510>] (netlink_sendmsg) from [<808596e0>] (____sys_sendmsg+0x1a8/0x1fc)
	[   39.567697] [<808596e0>] (____sys_sendmsg) from [<8085b1a8>] (___sys_sendmsg+0xa4/0xdc)
	[   39.575941] [<8085b1a8>] (___sys_sendmsg) from [<8085b310>] (sys_sendmsg+0x44/0x74)
	[   39.583841] [<8085b310>] (sys_sendmsg) from [<80300060>] (ret_fast_syscall+0x0/0x40)
	...
	[   39.620734] Code: bad PC value
	[   39.625869] ---[ end trace 8aef983ad3cbc032 ]---

Fixes: ba60f2793d3a ("wifi: ath11k: initialize hw_ops for IPQ5018")
Signed-off-by: Ziyang Huang <hzyitc@xxxxxxxxxxx>
---
 drivers/net/wireless/ath/ath11k/hw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath11k/hw.c b/drivers/net/wireless/ath/ath11k/hw.c
index eb995f9cf0fa..72797289b33e 100644
--- a/drivers/net/wireless/ath/ath11k/hw.c
+++ b/drivers/net/wireless/ath/ath11k/hw.c
@@ -1175,7 +1175,7 @@ const struct ath11k_hw_ops ipq5018_ops = {
 	.mpdu_info_get_peerid = ath11k_hw_ipq8074_mpdu_info_get_peerid,
 	.rx_desc_mac_addr2_valid = ath11k_hw_ipq9074_rx_desc_mac_addr2_valid,
 	.rx_desc_mpdu_start_addr2 = ath11k_hw_ipq9074_rx_desc_mpdu_start_addr2,
-
+	.get_ring_selector = ath11k_hw_ipq8074_get_tcl_ring_selector,
 };
 
 #define ATH11K_TX_RING_MASK_0 BIT(0)
-- 
2.25.1




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux