From: Ben Greear <greearb@xxxxxxxxxxxxxxx> Allow sensors tool to read radio's temperature, example: mt7921_phy17-pci-1800 Adapter: PCI adapter temp1: +72.0°C Signed-off-by: Ben Greear <greearb@xxxxxxxxxxxxxxx> --- .../net/wireless/mediatek/mt76/mt7921/init.c | 53 +++++++++++++++++++ .../net/wireless/mediatek/mt76/mt7921/mcu.c | 17 ++++++ .../wireless/mediatek/mt76/mt7921/mt7921.h | 1 + 3 files changed, 71 insertions(+) diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/init.c b/drivers/net/wireless/mediatek/mt76/mt7921/init.c index c15ce1a19000..18f0f2dfbbcf 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7921/init.c +++ b/drivers/net/wireless/mediatek/mt76/mt7921/init.c @@ -2,6 +2,9 @@ /* Copyright (C) 2020 MediaTek Inc. */ #include <linux/etherdevice.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/thermal.h> #include <linux/firmware.h> #include "mt7921.h" #include "../mt76_connac2_mac.h" @@ -58,6 +61,50 @@ static const struct ieee80211_iface_combination if_comb_chanctx[] = { } }; +static ssize_t mt7921_thermal_temp_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct mt7921_phy *phy = dev_get_drvdata(dev); + int i = to_sensor_dev_attr(attr)->index; + int temperature; + + switch (i) { + case 0: + temperature = mt7921_mcu_get_temperature(phy); + if (temperature < 0) + return temperature; + /* display in millidegree celcius */ + return sprintf(buf, "%u\n", temperature * 1000); + default: + return -EINVAL; + } +} +static SENSOR_DEVICE_ATTR_RO(temp1_input, mt7921_thermal_temp, 0); + +static struct attribute *mt7921_hwmon_attrs[] = { + &sensor_dev_attr_temp1_input.dev_attr.attr, + NULL, +}; +ATTRIBUTE_GROUPS(mt7921_hwmon); + +static int mt7921_thermal_init(struct mt7921_phy *phy) +{ + struct wiphy *wiphy = phy->mt76->hw->wiphy; + struct device *hwmon; + const char *name; + + name = devm_kasprintf(&wiphy->dev, GFP_KERNEL, "mt7921_%s", + wiphy_name(wiphy)); + + hwmon = devm_hwmon_device_register_with_groups(&wiphy->dev, name, phy, + mt7921_hwmon_groups); + if (IS_ERR(hwmon)) + return PTR_ERR(hwmon); + + return 0; +} + static void mt7921_regd_notifier(struct wiphy *wiphy, struct regulatory_request *request) @@ -384,6 +431,12 @@ static void mt7921_init_work(struct work_struct *work) return; } + ret = mt7921_thermal_init(&dev->phy); + if (ret) { + dev_err(dev->mt76.dev, "thermal_init failed\n"); + return; + } + /* we support chip reset now */ dev->hw_init_done = true; diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c index 9c4dcc0e5a7c..abeedacc28f2 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c +++ b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c @@ -1346,6 +1346,23 @@ int mt7921_mcu_set_clc(struct mt7921_dev *dev, u8 *alpha2, return 0; } +int mt7921_mcu_get_temperature(struct mt7921_phy *phy) +{ + struct mt7921_dev *dev = phy->dev; + struct { + u8 ctrl_id; + u8 action; + u8 band_idx; + u8 rsv[5]; + } req = { + .ctrl_id = THERMAL_SENSOR_TEMP_QUERY, + .band_idx = phy->mt76->band_idx, + }; + + return mt76_mcu_send_msg(&dev->mt76, MCU_EXT_CMD(THERMAL_CTRL), &req, + sizeof(req), true); +} + int mt7921_mcu_set_rxfilter(struct mt7921_dev *dev, u32 fif, u8 bit_op, u32 bit_map) { diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h b/drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h index 706f00df6836..85fddf99d497 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h +++ b/drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h @@ -568,6 +568,7 @@ int mt7921_mcu_set_sniffer(struct mt7921_dev *dev, struct ieee80211_vif *vif, bool enable); int mt7921_mcu_config_sniffer(struct mt7921_vif *vif, struct ieee80211_chanctx_conf *ctx); +int mt7921_mcu_get_temperature(struct mt7921_phy *phy); int mt7921_usb_sdio_tx_prepare_skb(struct mt76_dev *mdev, void *txwi_ptr, enum mt76_txq_id qid, struct mt76_wcid *wcid, -- 2.40.0