On Thu, Nov 6, 2008 at 4:28 PM, Luis R. Rodriguez<lrodriguez@xxxxxxxxxxx> wrote:> On Wed, Nov 5, 2008 at 5:14 AM, Benoit PAPILLAULT> <benoit.papillault@xxxxxxx> wrote:>> -----BEGIN PGP SIGNED MESSAGE----->> Hash: SHA1>>>> Luis R. Rodriguez a écrit :>>>> I recommend adding a separate function returning the string instead of>>>> this ugly "%s%s%s%s" trick. Much cleaner that way.>>>> I'm going to send an updated patch.>>>>>>>> Agreed, also please remove 3x3 comment as we don't have support for>>> those yet nor do I even have hardware for it. To be clear ath9k supports>>> 2x2 right now. :)>>>> Hummm... This is what the Atheros web site says and I have 3 antennas>> (very nice connector from UBNT btw). Of course, i don't know if it is>> supported by the driver, but at least, I think, it's supported by the>> hardware.>>>> Reference : http://www.atheros.com/pt/AR9001AP-3NX2.htm>> Thanks for this, I reviewed this now and you are correct, I was> completely mistaking the number of streams with the number of chains.> 3x3 means number of TX/RX chains, these devices however still only> support 2 streams which mean max theoretical throughput is still 300> Mbps. So 3x3 was correct, apologies for the miscommunication there. On HT40 :) also I updated the doc here: http://wireless.kernel.org/en/developers/Documentation/ieee80211/802.11n Luis��.n��������+%������w��{.n�����{���zW����ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f
