On 5/13/23 05:23, Jernej Škrabec wrote:
Larry,
Dne sreda, 10. maj 2023 ob 23:47:24 CEST je Larry Finger napisal(a):
On 5/10/23 16:07, Martin Blumenstingl wrote:
On Wed, May 10, 2023 at 12:02 AM Larry Finger <Larry.Finger@xxxxxxxxxxxx> wrote:
[...]
I added that patch to the driver. The user reports that he was able to do a ping
and an nslookup before it crashed with the following in the log:
That's some positive news alongside the crash log: it seems that a
part of the driver works! :-)
[ 8.700626] skbuff: skb_over_panic: text:ffff8000011924ac len:3341 put:3341
head:ffff000003b3c000 data:ffff000003b3c040 tail:0xd4d end:0x2c0 dev:<NULL>
[...]
Somehow skb->tail was greater than skb->end. Unfortunately I do not have access
to gdb to tell you what line corresponds to rtw_sdio_rx_skb+0x50 on the MangoPi
MQ Quad.
I need to have a closer look at the pkg_offset and struct
rtw_rx_pkt_stat which we receive.
Recently my own MangoPI MQ-Quad arrived but I did not have the time to
set it up yet. I'll try to do so during the weekend so I can debug
this on my own.
Please ping me next week in case I haven't provided any update until then.
I have some test prints in to check for skb overrun. My initial indication is
that the problem was in the c2h branch of rtw_sdio_rx_skb(), but my next run
should verify that. My changes will do a pr_warn_once() when the problem
happens, and then drop the skb.
My contact reported that he had one run of 3 minutes before the problem
happened, which is good news for most of the driver.
I may have discovered something interesting. rtl8723ds vendor driver has
following checks in RX data parsing code:
https://github.com/lwfinger/rtl8723ds/blob/master/hal/rtl8723d/sdio/rtl8723ds_recv.c#L83-L99
Those checks are absent in rtl8822bs vendor driver, which was my original
development platform for SDIO. This may indicate some kind of bug in FW
and/or HW.
I think that at least second check, which checks for exactly the case your
client experience, can be easily added and tested.
Thanks for this update. I added the following to the start of rtw_sdio_rx_skb():
/* fix Hardware RX data error, drop whole recv_buffer */
if (!(rtwdev->hal.rcr & BIT_ACRC32) && pkt_stat->crc_err) {
kfree_skb(skb);
return;
}
I think that duplicates the code in the vendor driver.
I have not heard from my user as to whether it helps. My communications with him
are at https://github.com/lwfinger/rtl8723ds/issues/37.
Larry
