On Fri, 2023-05-12 at 20:07 +0300, Bitterblue Smith wrote: > External mail. > > > > This is a newer chip, similar to the RTL8710BU in that it uses the same > PHY status structs. > > Features: 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps. > > It can allegedly have Bluetooth, but that's not implemented here. > > This chip can have many RFE (RF front end) types, of which types 1 > and 5 are the only ones tested. Many of the other types need different > initialisation tables. They can be added if someone wants them. > > The vendor driver v5.8.6.2_35538.20191028_COEX20190910-0d02 from > https://github.com/BrightX/rtl8192fu was used as reference, with > additional device IDs taken from > https://github.com/kelebek333/rtl8192fu-dkms. > > The vendor driver also claims to support devices with ID 0bda:a725, > but that is found in some bluetooth-only devices, so it's not supported > here. > > Signed-off-by: Bitterblue Smith <rtl8821cerfe2@xxxxxxxxx> > --- > v3: > - Rebase on top of wireless-next. > - Mark device 0b05:18b1 and RFE type 1 (ASUS USB-N13 C1) as tested. > > v2: > - Feedback from Ping-Ke Shih: > - Add rtl8xxxu_8192f.o to Makefile. > - Initialise variable channel_idx in rtl8192fu_config_kfree() and > variable ledcfg in rtl8192fu_led_brightness_set() to avoid > warnings. > - Give names to a lot of registers. > - Initialise bb_gain_for_path in rtl8192fu_config_kfree() in two > steps. > - Don't assign the return value of rtl8xxxu_write32_mask() to > variable val32 in rtl8xxxu_fill_iqk_matrix_b(). > - Add more information about device IDs to the commit message. > --- > drivers/net/wireless/realtek/rtl8xxxu/Kconfig | 3 +- > .../net/wireless/realtek/rtl8xxxu/Makefile | 2 +- > .../net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 47 + > .../realtek/rtl8xxxu/rtl8xxxu_8188f.c | 3 +- > .../realtek/rtl8xxxu/rtl8xxxu_8192f.c | 2090 +++++++++++++++++ > .../realtek/rtl8xxxu/rtl8xxxu_8710b.c | 1 + > .../realtek/rtl8xxxu/rtl8xxxu_8723b.c | 1 + > .../wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 107 +- > .../wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h | 39 + > 9 files changed, 2262 insertions(+), 31 deletions(-) > create mode 100644 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192f.c > > [...] > @@ -7484,6 +7522,9 @@ static int rtl8xxxu_probe(struct usb_interface *interface, > if (id->idProduct == 0x0109) > untested = 0; > break; > + case 0x0b05: > + if (id->idProduct == 0x18f1) > + untested = 0; 'break;' is missing. > default: > break; > } > [...]
