Search Linux Wireless

Re: rtw88: rtw8822cu (LM842) -> failed to get tx report from firmware

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, May 08, 2023 at 03:29:01PM +0200, Petter Mabacker wrote:
> I'm working with a Linux 6.1 based track, but with all the mentioned bug fixes cherry-picked to that track. They have all made the LM842 a lot more stabile, but the issue I see with "tx report failed" is currently blocking me from using the LM842, since the mender upgrade is a crucial part for my use-case.
> 
> I have been trying to find a better way to reproduce the issue, without any success so far. For me it takes just 10-30 sec with above mention flooding using iperf to at least trigger a similar case.
> 
> ...
> [  671.908527] rtw_8822cu 1-1:1.2: failed to get rx_queue, overflow
> [  671.914632] rtw_8822cu 1-1:1.2: failed to get rx_queue, overflow
> [  671.920750] rtw_8822cu 1-1:1.2: failed to get rx_queue, overflow
> [  671.926792] rtw_8822cu 1-1:1.2: failed to get rx_queue, overflow
> [  671.932924] rtw_8822cu 1-1:1.2: failed to get rx_queue, overflow

I am still not sure what to do about this. It happens with high RX load.
One way would be to just drop the log level of this message.
Otherwise this message should be harmless.

> 
> [  694.709045] rtw_8822cu 1-1:1.2: failed to get tx report from firmware
> 
> [  710.169496] rtw_8822cu 1-1:1.2: firmware failed to report density after scan
> [  717.701235] rtw_8822cu 1-1:1.2: failed to send h2c command
> 
> I can also mention that I'm running this in a i.MX6 SoloX based board.
> 
> I will let you guys know if I find a better way to reproduce the
> issue. But if you have any good ideas what above error (that brings
> down the entire interface) really mean (for example does it indicate
> kernel or firmware issue), please feel free to share some information
> about it and it might help me in troubleshooting the issue further.

Please try reproducing this with a recent mainline vanilla kernel. It
shouldn't be too hard to bring up a i.MX6 board with a vanilla kernel.

Regards,
 Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux