From: Zong-Zhe Yang <kevin_yang@xxxxxxxxxxx>
RTL8851B keeps almost the same interrupt flow as RTL8852A and RTL8852B.
But, it uses a different bitmask for interrupt indicator of FW HALT C2H.
So, we make a chip judgement in pci when configuring interrupt mask.
Signed-off-by: Zong-Zhe Yang <kevin_yang@xxxxxxxxxxx>
Signed-off-by: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
---
drivers/net/wireless/realtek/rtw89/pci.c | 9 +++++++--
drivers/net/wireless/realtek/rtw89/pci.h | 1 +
2 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtw89/pci.c b/drivers/net/wireless/realtek/rtw89/pci.c
index b53f346fef979..92bfef942d3a9 100644
--- a/drivers/net/wireless/realtek/rtw89/pci.c
+++ b/drivers/net/wireless/realtek/rtw89/pci.c
@@ -3216,11 +3216,16 @@ static void rtw89_pci_clear_resource(struct rtw89_dev *rtwdev,
void rtw89_pci_config_intr_mask(struct rtw89_dev *rtwdev)
{
struct rtw89_pci *rtwpci = (struct rtw89_pci *)rtwdev->priv;
+ const struct rtw89_chip_info *chip = rtwdev->chip;
+ u32 hs0isr_ind_int_en = B_AX_HS0ISR_IND_INT_EN;
+
+ if (chip->chip_id == RTL8851B)
+ hs0isr_ind_int_en = B_AX_HS0ISR_IND_INT_EN_WKARND;
rtwpci->halt_c2h_intrs = B_AX_HALT_C2H_INT_EN | 0;
if (rtwpci->under_recovery) {
- rtwpci->intrs[0] = B_AX_HS0ISR_IND_INT_EN;
+ rtwpci->intrs[0] = hs0isr_ind_int_en;
rtwpci->intrs[1] = 0;
} else {
rtwpci->intrs[0] = B_AX_TXDMA_STUCK_INT_EN |
@@ -3230,7 +3235,7 @@ void rtw89_pci_config_intr_mask(struct rtw89_dev *rtwdev)
B_AX_RXDMA_STUCK_INT_EN |
B_AX_RDU_INT_EN |
B_AX_RPQBD_FULL_INT_EN |
- B_AX_HS0ISR_IND_INT_EN;
+ hs0isr_ind_int_en;
rtwpci->intrs[1] = B_AX_HC10ISR_IND_INT_EN;
}
diff --git a/drivers/net/wireless/realtek/rtw89/pci.h b/drivers/net/wireless/realtek/rtw89/pci.h
index 0e4bd210b100f..2f3d1ad3b0f7d 100644
--- a/drivers/net/wireless/realtek/rtw89/pci.h
+++ b/drivers/net/wireless/realtek/rtw89/pci.h
@@ -150,6 +150,7 @@
#define B_AX_HD1ISR_IND_INT_EN BIT(26)
#define B_AX_HD0ISR_IND_INT_EN BIT(25)
#define B_AX_HS0ISR_IND_INT_EN BIT(24)
+#define B_AX_HS0ISR_IND_INT_EN_WKARND BIT(23)
#define B_AX_RETRAIN_INT_EN BIT(21)
#define B_AX_RPQBD_FULL_INT_EN BIT(20)
#define B_AX_RDU_INT_EN BIT(19)
--
2.25.1
