As this driver uses HAS_RATE_CONTROL, rate_flags will not be provided by
mac80211.
Stop using tx_info->control.rates[0].flags and ieee80211_get_rts_cts_rate()
and use rts_threshold and bss_conf.use_cts_prot instead to determine
when to use RTS and CTS.
Send RTS with 24M rate like the vendor drivers. Also set this RTS rate
for ampdu_enable = true, because we also enable RTS for these frames.
Signed-off-by: Martin Kaistra <martin.kaistra@xxxxxxxxxxxxx>
Reviewed-by: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
---
.../wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 40 +++++++++----------
1 file changed, 20 insertions(+), 20 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index a2cc9177fba49..aa430a912d822 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -5255,7 +5255,6 @@ rtl8xxxu_fill_txdesc_v1(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
u8 *qc = ieee80211_get_qos_ctl(hdr);
u8 tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
u32 rate = 0;
- u16 rate_flags = tx_info->control.rates[0].flags;
u16 seq_number;
if (rtl8xxxu_debug & RTL8XXXU_DEBUG_TX)
@@ -5296,10 +5295,10 @@ rtl8xxxu_fill_txdesc_v1(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
* rts_rate is zero if RTS/CTS or CTS to SELF are not enabled
*/
tx_desc->txdw4 |= cpu_to_le32(rts_rate << TXDESC32_RTS_RATE_SHIFT);
- if (ampdu_enable || (rate_flags & IEEE80211_TX_RC_USE_RTS_CTS)) {
+ if (ampdu_enable || tx_info->control.use_rts) {
tx_desc->txdw4 |= cpu_to_le32(TXDESC32_RTS_CTS_ENABLE);
tx_desc->txdw4 |= cpu_to_le32(TXDESC32_HW_RTS_ENABLE);
- } else if (rate_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
+ } else if (tx_info->control.use_cts_prot) {
tx_desc->txdw4 |= cpu_to_le32(TXDESC32_CTS_SELF_ENABLE);
tx_desc->txdw4 |= cpu_to_le32(TXDESC32_HW_RTS_ENABLE);
}
@@ -5322,7 +5321,6 @@ rtl8xxxu_fill_txdesc_v2(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
u8 *qc = ieee80211_get_qos_ctl(hdr);
u8 tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
u32 rate = 0;
- u16 rate_flags = tx_info->control.rates[0].flags;
u16 seq_number;
tx_desc40 = (struct rtl8xxxu_txdesc40 *)tx_desc32;
@@ -5363,13 +5361,14 @@ rtl8xxxu_fill_txdesc_v2(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
tx_desc40->txdw5 |= cpu_to_le32(TXDESC40_SHORT_PREAMBLE);
tx_desc40->txdw4 |= cpu_to_le32(rts_rate << TXDESC40_RTS_RATE_SHIFT);
+
/*
* rts_rate is zero if RTS/CTS or CTS to SELF are not enabled
*/
- if (ampdu_enable || (rate_flags & IEEE80211_TX_RC_USE_RTS_CTS)) {
+ if (ampdu_enable || tx_info->control.use_rts) {
tx_desc40->txdw3 |= cpu_to_le32(TXDESC40_RTS_CTS_ENABLE);
tx_desc40->txdw3 |= cpu_to_le32(TXDESC40_HW_RTS_ENABLE);
- } else if (rate_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
+ } else if (tx_info->control.use_cts_prot) {
/*
* For some reason the vendor driver doesn't set
* TXDESC40_HW_RTS_ENABLE for CTS to SELF
@@ -5396,7 +5395,6 @@ rtl8xxxu_fill_txdesc_v3(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
u8 *qc = ieee80211_get_qos_ctl(hdr);
u8 tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
u32 rate = 0;
- u16 rate_flags = tx_info->control.rates[0].flags;
u16 seq_number;
seq_number = IEEE80211_SEQ_TO_SN(le16_to_cpu(hdr->seq_ctrl));
@@ -5451,10 +5449,10 @@ rtl8xxxu_fill_txdesc_v3(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
* rts_rate is zero if RTS/CTS or CTS to SELF are not enabled
*/
tx_desc->txdw4 |= cpu_to_le32(rts_rate << TXDESC32_RTS_RATE_SHIFT);
- if (ampdu_enable || (rate_flags & IEEE80211_TX_RC_USE_RTS_CTS)) {
+ if (ampdu_enable || tx_info->control.use_rts) {
tx_desc->txdw4 |= cpu_to_le32(TXDESC32_RTS_CTS_ENABLE);
tx_desc->txdw4 |= cpu_to_le32(TXDESC32_HW_RTS_ENABLE);
- } else if (rate_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
+ } else if (tx_info->control.use_cts_prot) {
tx_desc->txdw4 |= cpu_to_le32(TXDESC32_CTS_SELF_ENABLE);
tx_desc->txdw4 |= cpu_to_le32(TXDESC32_HW_RTS_ENABLE);
}
@@ -5478,7 +5476,6 @@ static void rtl8xxxu_tx(struct ieee80211_hw *hw,
struct device *dev = &priv->udev->dev;
u32 queue, rts_rate;
u16 pktlen = skb->len;
- u16 rate_flag = tx_info->control.rates[0].flags;
int tx_desc_size = priv->fops->tx_desc_size;
u8 macid;
int ret;
@@ -5563,20 +5560,23 @@ static void rtl8xxxu_tx(struct ieee80211_hw *hw,
}
}
- if (rate_flag & IEEE80211_TX_RC_SHORT_GI ||
- (ieee80211_is_data_qos(hdr->frame_control) &&
- sta && sta->deflink.ht_cap.cap &
- (IEEE80211_HT_CAP_SGI_40 | IEEE80211_HT_CAP_SGI_20)))
+ if (ieee80211_is_data_qos(hdr->frame_control) &&
+ sta && sta->deflink.ht_cap.cap &
+ (IEEE80211_HT_CAP_SGI_40 | IEEE80211_HT_CAP_SGI_20))
sgi = true;
- if (rate_flag & IEEE80211_TX_RC_USE_SHORT_PREAMBLE ||
- (sta && vif && vif->bss_conf.use_short_preamble))
+ if (sta && vif && vif->bss_conf.use_short_preamble)
short_preamble = true;
- if (rate_flag & IEEE80211_TX_RC_USE_RTS_CTS)
- rts_rate = ieee80211_get_rts_cts_rate(hw, tx_info)->hw_value;
- else if (rate_flag & IEEE80211_TX_RC_USE_CTS_PROTECT)
- rts_rate = ieee80211_get_rts_cts_rate(hw, tx_info)->hw_value;
+ if (skb->len > hw->wiphy->rts_threshold)
+ tx_info->control.use_rts = true;
+
+ if (sta && vif && vif->bss_conf.use_cts_prot)
+ tx_info->control.use_cts_prot = true;
+
+ if (ampdu_enable || tx_info->control.use_rts ||
+ tx_info->control.use_cts_prot)
+ rts_rate = DESC_RATE_24M;
else
rts_rate = 0;
--
2.30.2
