There's no need to initialize interrupts for RTL8188FTV like the vendor driver.
Signed-off-by: Kevin Lo <kevlo@xxxxxxxxx>
---
v2:
- Fix my email address.
---
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index 620a5cc2bfdd..7f620dc47ee0 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -4023,9 +4023,6 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
if (priv->rtl_chip == RTL8192E) {
rtl8xxxu_write32(priv, REG_HIMR0, 0x00);
rtl8xxxu_write32(priv, REG_HIMR1, 0x00);
- } else if (priv->rtl_chip == RTL8188F) {
- rtl8xxxu_write32(priv, REG_HISR0, 0xffffffff);
- rtl8xxxu_write32(priv, REG_HISR1, 0xffffffff);
} else if (priv->rtl_chip == RTL8188E) {
rtl8xxxu_write32(priv, REG_HISR0, 0xffffffff);
val32 = IMR0_PSTIMEOUT | IMR0_TBDER | IMR0_CPWM | IMR0_CPWM2;
@@ -4035,7 +4032,7 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
val8 = rtl8xxxu_read8(priv, REG_USB_SPECIAL_OPTION);
val8 |= USB_SPEC_INT_BULK_SELECT;
rtl8xxxu_write8(priv, REG_USB_SPECIAL_OPTION, val8);
- } else {
+ } else if (priv->rtl_chip != RTL8188F) {
/*
* Enable all interrupts - not obvious USB needs to do this
*/
