Use the sequence from the vendor driver for setting up the beacon
related registers.
Also set the MAC address register here, in case the MAC address for the
new interface should be different from what was set in
rtl8xxxu_init_device(). This happens for example with the hostapd config
option "bssid".
Signed-off-by: Martin Kaistra <martin.kaistra@xxxxxxxxxxxxx>
Reviewed-by: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
---
.../wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 31 ++++++++++++++++---
.../wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h | 2 ++
2 files changed, 29 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index a44bd5038ad24..b8e5003c55e9e 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -6470,18 +6470,39 @@ static int rtl8xxxu_add_interface(struct ieee80211_hw *hw,
int ret;
u8 val8;
+ if (!priv->vif)
+ priv->vif = vif;
+ else
+ return -EOPNOTSUPP;
+
switch (vif->type) {
case NL80211_IFTYPE_STATION:
- if (!priv->vif)
- priv->vif = vif;
- else
- return -EOPNOTSUPP;
rtl8xxxu_stop_tx_beacon(priv);
val8 = rtl8xxxu_read8(priv, REG_BEACON_CTRL);
val8 |= BEACON_ATIM | BEACON_FUNCTION_ENABLE |
BEACON_DISABLE_TSF_UPDATE;
rtl8xxxu_write8(priv, REG_BEACON_CTRL, val8);
+ ret = 0;
+ break;
+ case NL80211_IFTYPE_AP:
+ rtl8xxxu_write8(priv, REG_BEACON_CTRL,
+ BEACON_DISABLE_TSF_UPDATE | BEACON_CTRL_MBSSID);
+ rtl8xxxu_write8(priv, REG_ATIMWND, 0x0c); /* 12ms */
+ rtl8xxxu_write16(priv, REG_TSFTR_SYN_OFFSET, 0x7fff); /* ~32ms */
+ rtl8xxxu_write8(priv, REG_DUAL_TSF_RST, DUAL_TSF_RESET_TSF0);
+
+ /* enable BCN0 function */
+ rtl8xxxu_write8(priv, REG_BEACON_CTRL,
+ BEACON_DISABLE_TSF_UPDATE |
+ BEACON_FUNCTION_ENABLE | BEACON_CTRL_MBSSID |
+ BEACON_CTRL_TX_BEACON_RPT);
+
+ /* select BCN on port 0 */
+ val8 = rtl8xxxu_read8(priv, REG_CCK_CHECK);
+ val8 &= ~BIT_BCN_PORT_SEL;
+ rtl8xxxu_write8(priv, REG_CCK_CHECK, val8);
+
ret = 0;
break;
default:
@@ -6489,6 +6510,8 @@ static int rtl8xxxu_add_interface(struct ieee80211_hw *hw,
}
rtl8xxxu_set_linktype(priv, vif->type);
+ ether_addr_copy(priv->mac_addr, vif->addr);
+ rtl8xxxu_set_mac(priv);
return ret;
}
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
index ad285e4ac0ec4..8571d5129f327 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
@@ -575,6 +575,8 @@
#define REG_ARFR1 0x0448
#define REG_ARFR2 0x044c
#define REG_ARFR3 0x0450
+#define REG_CCK_CHECK 0x0454
+#define BIT_BCN_PORT_SEL BIT(5)
#define REG_AMPDU_MAX_TIME_8723B 0x0456
#define REG_AGGLEN_LMT 0x0458
#define REG_AMPDU_MIN_SPACE 0x045c
--
2.30.2
