Michael Buesch <mb@xxxxxxxxx> wrote: > Everybody with PHY TX error, please try updated firmware from > ftp://ftp.linksys.com/opensourcecode/wrt610n/1.00.00.018/wrt610n_v1.00.00.018_us.tgz > (Yeah, big tarball. It's 87MB) > > Extract the file wrt610n_v1.00.00.018_us/release/src/wl/linux/wl.o out of the archive. > Get latest b43-tools: > git clone http://git.bu3sch.de/git/b43-tools.git > > Build and install fwcutter from latest b43-tools.git > > Extract the firmware from the wl.o file: > b43-fwcutter --unsupported -w /lib/firmware/DESTPATH wl.o > > Try to reproduce the PHY TX error with the new firmware. Still getting them, OpenWRT Kamikaze trunk on a Linksys WRT54G b43-phy0: Broadcom 5352 WLAN found b43-phy0 debug: Found PHY: Analog 2, Type 2, Revision 7 b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2 b43-phy0 debug: DebugFS (CONFIG_DEBUG_FS) not enabled in kernel config input: b43-phy0 as /devices/virtual/input/input0 b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23) b43-phy0 debug: Chip initialized b43-phy0 debug: 32-bit DMA initialized Registered led device: b43-phy0::radio b43-phy0 debug: Wireless interface started b43-phy0 debug: Adding Interface type 2 b43-phy0 debug: Removing Interface type 2 b43-phy0 debug: Wireless interface stopped b43-phy0 debug: DMA-32 rx_ring: Used slots 0/64, Failed frames 0/0 = 0.0%, Average tries 0.00 b43-phy0 debug: DMA-32 tx_ring_AC_BK: Used slots 0/128, Failed frames 0/0 = 0.0%, Average tries 0.00 b43-phy0 debug: DMA-32 tx_ring_AC_BE: Used slots 0/128, Failed frames 0/0 = 0.0%, Average tries 0.00 b43-phy0 debug: DMA-32 tx_ring_AC_VI: Used slots 0/128, Failed frames 0/0 = 0.0%, Average tries 0.00 b43-phy0 debug: DMA-32 tx_ring_AC_VO: Used slots 0/128, Failed frames 0/0 = 0.0%, Average tries 0.00 b43-phy0 debug: DMA-32 tx_ring_mcast: Used slots 0/128, Failed frames 0/0 = 0.0%, Average tries 0.00 input: b43-phy0 as /devices/virtual/input/input1 b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23) Bernhard -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html