BCM63xx (Big Endian MIPS) devices store the calibration data in MTD
partitions but it needs to be swapped in order to work, otherwise it fails:
ath9k 0000:00:01.0: enabling device (0000 -> 0002)
ath: phy0: Ignoring endianness difference in EEPROM magic bytes.
ath: phy0: Bad EEPROM VER 0x0001 or REV 0x00e0
ath: phy0: Unable to initialize hardware; initialization status: -22
ath9k 0000:00:01.0: Failed to initialize device
ath9k: probe of 0000:00:01.0 failed with error -22
Fixes: eb3a97a69be8 ("ath9k: fetch calibration data via nvmem subsystem")
Signed-off-by: Álvaro Fernández Rojas <noltari@xxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/init.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 4f00400c7ffb..1314fbc55c0b 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -615,7 +615,6 @@ static int ath9k_nvmem_request_eeprom(struct ath_softc *sc)
ah->nvmem_blob_len = len;
ah->ah_flags &= ~AH_USE_EEPROM;
- ah->ah_flags |= AH_NO_EEP_SWAP;
return 0;
}
--
2.39.2
