Marek Vasut <marex@xxxxxxx> wrote: > Add SDIO ids for use with the muRata 1YN (Cypress CYW43439). > The odd thing about this is that the previous 1YN populated > on M.2 card for evaluation purposes had BRCM SDIO vendor ID, > while the chip populated on real hardware has a Cypress one. > The device ID also differs between the two devices. But they > are both 43439 otherwise, so add the IDs for both. > > On-device 1YN (43439), the new one, chip label reads "1YN": > ``` > /sys/.../mmc_host/mmc2/mmc2:0001 # cat vendor device > 0x04b4 > 0xbd3d > ``` > > EA M.2 evaluation board 1YN (43439), the old one, chip label reads "1YN ES1.4": > ``` > /sys/.../mmc_host/mmc0/mmc0:0001/# cat vendor device > 0x02d0 > 0xa9a6 > ``` > > Reviewed-by: Hans de Goede <hdegoede@xxxxxxxxxx> > Cc: stable@xxxxxxxxxxxxxxx > Signed-off-by: Marek Vasut <marex@xxxxxxx> > Reviewed-by: Simon Horman <simon.horman@xxxxxxxxxxxx> Patch applied to wireless-next.git, thanks. cc4cffc3c142 wifi: brcmfmac: add Cypress 43439 SDIO ids -- https://patchwork.kernel.org/project/linux-wireless/patch/20230407203752.128539-1-marex@xxxxxxx/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
