To support SCC (1 STA + 1 AP), we need to deal some hardware things:
1. AP mode only can work on hardware port 0
2. adjust and enlarge reserved pages for two VIFs
Other things are to coordinate two VIFs work well to prevent interference
with each other, like scan thing.
v2:
- use rtw_dbg() instead of rtw_info() for switching port. (patch 2/8)
- Don't reject scan when operating AP mode, so remove the limitation
from patch 4/8 and add patch 7/8 to handle it.
Due to hardware limitation, we can't sending beacon and do scan at
the same time, so it could lose some packets or AP's clients get
disconnected.
Po-Hao Huang (8):
wifi: rtw88: add bitmap for dynamic port settings
wifi: rtw88: add port switch for AP mode
wifi: rtw88: 8822c: extend reserved page number
wifi: rtw88: disallow PS during AP mode
wifi: rtw88: refine reserved page flow for AP mode
wifi: rtw88: prevent scan abort with other VIFs
wifi: rtw88: handle station mode concurrent scan with AP mode
wifi: rtw88: 8822c: add iface combination
drivers/net/wireless/realtek/rtw88/fw.c | 20 ++-
drivers/net/wireless/realtek/rtw88/fw.h | 2 +-
drivers/net/wireless/realtek/rtw88/mac.c | 2 +-
drivers/net/wireless/realtek/rtw88/mac80211.c | 40 ++++-
drivers/net/wireless/realtek/rtw88/main.c | 146 +++++++++++++++++-
drivers/net/wireless/realtek/rtw88/main.h | 15 ++
drivers/net/wireless/realtek/rtw88/rtw8723d.c | 1 +
drivers/net/wireless/realtek/rtw88/rtw8821c.c | 1 +
drivers/net/wireless/realtek/rtw88/rtw8822b.c | 1 +
drivers/net/wireless/realtek/rtw88/rtw8822c.c | 1 +
10 files changed, 217 insertions(+), 12 deletions(-)
--
2.25.1
