Search Linux Wireless

[PATCH 13/15] wifi: iwlwifi: yoyo: skip dump correctly on hw error

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Daniel Gabay <daniel.gabay@xxxxxxxxx>

When NIC is in a bad state, reading data will return 28 bits as
0xa5a5a5a and the lowest 4 bits are not fixed value.

Mask these bits in a few places to skip the dump correctly.

Fixes: 89639e06d0f3 ("iwlwifi: yoyo: support for new DBGI_SRAM region")
Signed-off-by: Daniel Gabay <daniel.gabay@xxxxxxxxx>
Signed-off-by: Gregory Greenman <gregory.greenman@xxxxxxxxx>
---
 drivers/net/wireless/intel/iwlwifi/fw/dbg.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/fw/dbg.c b/drivers/net/wireless/intel/iwlwifi/fw/dbg.c
index 51cdbc13fbcd..d5b51496bd0b 100644
--- a/drivers/net/wireless/intel/iwlwifi/fw/dbg.c
+++ b/drivers/net/wireless/intel/iwlwifi/fw/dbg.c
@@ -1038,7 +1038,7 @@ iwl_dump_ini_prph_mac_iter(struct iwl_fw_runtime *fwrt,
 	range->range_data_size = reg->dev_addr.size;
 	for (i = 0; i < le32_to_cpu(reg->dev_addr.size); i += 4) {
 		prph_val = iwl_read_prph(fwrt->trans, addr + i);
-		if (prph_val == 0x5a5a5a5a)
+		if ((prph_val & ~0xf) == 0xa5a5a5a0)
 			return -EBUSY;
 		*val++ = cpu_to_le32(prph_val);
 	}
@@ -1562,7 +1562,7 @@ iwl_dump_ini_dbgi_sram_iter(struct iwl_fw_runtime *fwrt,
 		prph_data = iwl_read_prph_no_grab(fwrt->trans, (i % 2) ?
 					  DBGI_SRAM_TARGET_ACCESS_RDATA_MSB :
 					  DBGI_SRAM_TARGET_ACCESS_RDATA_LSB);
-		if (prph_data == 0x5a5a5a5a) {
+		if ((prph_data & ~0xf) == 0xa5a5a5a0) {
 			iwl_trans_release_nic_access(fwrt->trans);
 			return -EBUSY;
 		}
-- 
2.38.1




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux