On 4/11/23 11:00, Johannes Berg wrote:
On Tue, 2023-04-11 at 10:09 -0700, Ben Greear wrote:
Hello,
Our test team reports that they get reliable firmware crashes on ax200 radios against multiple
APs when running 100Mbps UL + DL traffic (100Mbps in both directions).
This happens on 5.19-ish kernels as well as 6.2.9+.
ax210 radios in same setup are much more stable.
Please let us know if you would like additional debug information, including binary
crash dump files from the radio....
[19241.588542] sta0001: Limiting TX power to 27 (30 - 3) dBm as advertised by 28:80:88:f3:b2:00
4[19245.998099] iwlwifi 0000:12:00.0: Microcode SW error detected. Restarting 0x0.
5[19246.004160] iwlwifi 0000:12:00.0: Start IWL Error Log Dump:
6[19246.008457] iwlwifi 0000:12:00.0: Transport status: 0x0000004B, valid: 6
7[19246.013867] iwlwifi 0000:12:00.0: Loaded firmware version: 72.daa05125.0 cc-a0-72.ucode
8[19246.020573] iwlwifi 0000:12:00.0: 0x000022CE | ADVANCED_SYSASSERT
Pretty sure this means that the RX was faster than the CPU was
processing, but why would that happen at 100 Mbps?
The system should not be overly stressed in this case, and the hardware in general can run
at multi-gig speeds. But, the CPU could be slowed down periodically for some other reason,
and possibly there were several other radios in the system. We'll provide some better details
on the hardware setup.
Thanks,
Ben
--
Ben Greear <greearb@xxxxxxxxxxxxxxx>
Candela Technologies Inc http://www.candelatech.com
