Search Linux Wireless

[PATCH v5 4/9] wifi: rtw88: main: Add the {cpwm,rpwm}_addr for SDIO based chipsets

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Initialize the rpwm_addr and cpwm_addr for power-saving support on SDIO
based chipsets.

Reviewed-by: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
---
Changes since v4:
- none

Changes since v3:
- add Ping-Ke's reviewed-by (again, thank you!)

Changes since v2:
- none

Changes since v1:
- none


 drivers/net/wireless/realtek/rtw88/main.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/wireless/realtek/rtw88/main.c b/drivers/net/wireless/realtek/rtw88/main.c
index b2e78737bd5d..cdc4703ead5f 100644
--- a/drivers/net/wireless/realtek/rtw88/main.c
+++ b/drivers/net/wireless/realtek/rtw88/main.c
@@ -18,6 +18,7 @@
 #include "debug.h"
 #include "bf.h"
 #include "sar.h"
+#include "sdio.h"
 
 bool rtw_disable_lps_deep_mode;
 EXPORT_SYMBOL(rtw_disable_lps_deep_mode);
@@ -1785,6 +1786,10 @@ static int rtw_chip_parameter_setup(struct rtw_dev *rtwdev)
 		rtwdev->hci.rpwm_addr = 0x03d9;
 		rtwdev->hci.cpwm_addr = 0x03da;
 		break;
+	case RTW_HCI_TYPE_SDIO:
+		rtwdev->hci.rpwm_addr = REG_SDIO_HRPWM1;
+		rtwdev->hci.cpwm_addr = REG_SDIO_HCPWM1_V2;
+		break;
 	case RTW_HCI_TYPE_USB:
 		rtwdev->hci.rpwm_addr = 0xfe58;
 		rtwdev->hci.cpwm_addr = 0xfe57;
-- 
2.40.0




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux