Hello, As low as it goes. This is a port for keyboard/mouse usage. Nothing useful was seen in dmesg. Will make a kernel with your patch, test it at the weekend and tell you how it goes. I have a PCI USB 1.1 only controller to test it as well! Thanks On Thu, 16 Mar 2023 at 16:18, Bitterblue Smith <rtl8821cerfe2@xxxxxxxxx> wrote: > > On 25/11/2022 21:40, Ioannis Barkas wrote: > > Hello, > > > > I have tested various USB devices and all worked except the TL-WN823N. > > This device has never worked and we have 2 of them. > > > > On Ubuntu boot I get: > > [ 1208.638541] usb 1-1: RTL8192EU rev B (SMIC) 2T2R, TX queues 3, > > WiFi=1, BT=0, GPS=0, HI PA=0 > > [ 1208.638553] usb 1-1: RTL8192EU MAC: d4:6e:0e:**:**:** > > [ 1208.638560] usb 1-1: rtl8xxxu: Loading firmware rtlwifi/rtl8192eu_nic.bin > > [ 1208.641483] usb 1-1: Firmware revision 19.0 (signature 0x92e1) > > [ 1209.735452] usbcore: registered new interface driver rtl8xxxu > > > > When I attempt to connect at a 2,4GHz WPA3 SSID this is what I get: > > [ 1502.319954] wlxd46e0eeba0f4: authenticate with c6:27:28:**:**:** > > [ 1502.332105] wlxd46e0eeba0f4: send auth to c6:27:28:**:**:** (try 1/3) > > [ 1502.476159] wlxd46e0eeba0f4: authenticate with c6:27:28:**:**:** > > [ 1502.476181] wlxd46e0eeba0f4: send auth to c6:27:28:**:**:** (try 1/3) > > [ 1502.587356] wlxd46e0eeba0f4: authenticated > > [ 1502.589113] wlxd46e0eeba0f4: associate with c6:27:28:**:**:** (try 1/3) > > [ 1502.593773] wlxd46e0eeba0f4: RX AssocResp from c6:27:28:**:**:** > > (capab=0x1431 status=0 aid=16) > > [ 1502.595559] usb 1-1: rtl8xxxu_bss_info_changed: HT supported > > [ 1502.597222] wlxd46e0eeba0f4: associated > > [ 1502.743847] wlxd46e0eeba0f4: deauthenticating from > > c6:27:28:**:**:** by local choice (Reason: 1=UNSPECIFIED) > > > > To make things worse, I accidentally inserted it in a USB 1.1 port on > > my AMD test PC and it could not even connect to a combo 2,4GHz WPA2,3 > > SSID: > > [ 1001.681485] wlxd46e0eeba0f4: authenticate with c6:27:28:**:**:** > > [ 1001.703190] wlxd46e0eeba0f4: send auth to c6:27:28:**:**:** (try 1/3) > > [ 1001.904265] wlxd46e0eeba0f4: send auth to c6:27:28:**:**:** (try 2/3) > > [ 1002.108231] wlxd46e0eeba0f4: send auth to c6:27:28:**:**:** (try 3/3) > > [ 1002.312262] wlxd46e0eeba0f4: authentication with c6:27:28:**:**:** timed out > > [ 1013.501401] wlxd46e0eeba0f4: authenticate with c6:27:28:**:**:** > > [ 1013.523483] wlxd46e0eeba0f4: send auth to c6:27:28:**:**:** (try 1/3) > > [ 1013.724276] wlxd46e0eeba0f4: send auth to c6:27:28:**:**:** (try 2/3) > > [ 1013.928271] wlxd46e0eeba0f4: send auth to c6:27:28:**:**:** (try 3/3) > > [ 1014.132282] wlxd46e0eeba0f4: authentication with c6:27:28:**:**:** timed out > > [ 1027.230375] wlxd46e0eeba0f4: authenticate with c6:27:28:**:**:** > > [ 1027.242103] wlxd46e0eeba0f4: send auth to c6:27:28:**:**:** (try 1/3) > > [ 1027.444258] wlxd46e0eeba0f4: send auth to c6:27:28:**:**:** (try 2/3) > > [ 1027.648271] wlxd46e0eeba0f4: send auth to c6:27:28:**:**:** (try 3/3) > > [ 1027.852237] wlxd46e0eeba0f4: authentication with c6:27:28:**:**:** timed out > > > > So this problem is fixed now since kernels 4.14.308 4.19.276 5.4.235 > 5.10.173 5.15.99 6.1.16 6.2.3 6.3-rc1. > > > On USB 2.0 port the problem with WPA2,3 SSID was resolved. Is it > > possible to set a flag so that the driver will bail out if the device > > is on a USB 1.1 port? The truth is that the maximum speed it reached > > was way below the 12Mb of USB 1.1 so it should not have a problem but > > in practise it does... > > > > I'm curious about the low speed. How low is it? Do you see anything > in dmesg? Does this patch fix it? > https://bugzilla.kernel.org/attachment.cgi?id=302960 > > The driver can be modified to support USB 1.1 at least with some of the > chips, but I don't have USB 1.1 to test it. > > > This is the device: > > Device Descriptor: > > bLength 18 > > bDescriptorType 1 > > bcdUSB 2.10 > > bDeviceClass 0 > > bDeviceSubClass 0 > > bDeviceProtocol 0 > > bMaxPacketSize0 64 > > idVendor 0x2357 TP-Link > > idProduct 0x0109 TL-WN823N v2/v3 [Realtek RTL8192EU] > > bcdDevice 2.00 > > iManufacturer 1 Realtek > > iProduct 2 802.11n NIC > > iSerial 3 00********** > > bNumConfigurations 1 > > Configuration Descriptor: > > bLength 9 > > bDescriptorType 2 > > wTotalLength 0x0035 > > bNumInterfaces 1 > > bConfigurationValue 1 > > iConfiguration 0 > > bmAttributes 0xe0 > > Self Powered > > Remote Wakeup > > MaxPower 500mA > > Interface Descriptor: > > bLength 9 > > bDescriptorType 4 > > bInterfaceNumber 0 > > bAlternateSetting 0 > > bNumEndpoints 5 > > bInterfaceClass 255 Vendor Specific Class > > bInterfaceSubClass 255 Vendor Specific Subclass > > bInterfaceProtocol 255 Vendor Specific Protocol > > iInterface 2 802.11n NIC > > Endpoint Descriptor: > > bLength 7 > > bDescriptorType 5 > > bEndpointAddress 0x84 EP 4 IN > > bmAttributes 2 > > Transfer Type Bulk > > Synch Type None > > Usage Type Data > > wMaxPacketSize 0x0200 1x 512 bytes > > bInterval 0 > > Endpoint Descriptor: > > bLength 7 > > bDescriptorType 5 > > bEndpointAddress 0x05 EP 5 OUT > > bmAttributes 2 > > Transfer Type Bulk > > Synch Type None > > Usage Type Data > > wMaxPacketSize 0x0200 1x 512 bytes > > bInterval 0 > > Endpoint Descriptor: > > bLength 7 > > bDescriptorType 5 > > bEndpointAddress 0x06 EP 6 OUT > > bmAttributes 2 > > Transfer Type Bulk > > Synch Type None > > Usage Type Data > > wMaxPacketSize 0x0200 1x 512 bytes > > bInterval 0 > > Endpoint Descriptor: > > bLength 7 > > bDescriptorType 5 > > bEndpointAddress 0x87 EP 7 IN > > bmAttributes 3 > > Transfer Type Interrupt > > Synch Type None > > Usage Type Data > > wMaxPacketSize 0x0040 1x 64 bytes > > bInterval 3 > > Endpoint Descriptor: > > bLength 7 > > bDescriptorType 5 > > bEndpointAddress 0x08 EP 8 OUT > > bmAttributes 2 > > Transfer Type Bulk > > Synch Type None > > Usage Type Data > > wMaxPacketSize 0x0200 1x 512 bytes > > bInterval 0 > > Binary Object Store Descriptor: > > bLength 5 > > bDescriptorType 15 > > wTotalLength 0x000c > > bNumDeviceCaps 1 > > USB 2.0 Extension Device Capability: > > bLength 7 > > bDescriptorType 16 > > bDevCapabilityType 2 > > bmAttributes 0x00000002 > > HIRD Link Power Management (LPM) Supported > > Device Status: 0x0001 > > Self Powered >
