For two RF paths chips, we normally set path B as main path by default.
8851B has single one RF path, so set TX path to A and set mapping of
path B to 0.
Signed-off-by: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
---
drivers/net/wireless/realtek/rtw89/fw.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtw89/fw.c b/drivers/net/wireless/realtek/rtw89/fw.c
index 713aefd0cf8dd..7f69a8ee86bb2 100644
--- a/drivers/net/wireless/realtek/rtw89/fw.c
+++ b/drivers/net/wireless/realtek/rtw89/fw.c
@@ -1150,9 +1150,18 @@ int rtw89_fw_h2c_p2p_act(struct rtw89_dev *rtwdev, struct ieee80211_vif *vif,
static void __rtw89_fw_h2c_set_tx_path(struct rtw89_dev *rtwdev,
struct sk_buff *skb)
{
+ const struct rtw89_chip_info *chip = rtwdev->chip;
struct rtw89_hal *hal = &rtwdev->hal;
- u8 ntx_path = hal->antenna_tx ? hal->antenna_tx : RF_B;
- u8 map_b = hal->antenna_tx == RF_AB ? 1 : 0;
+ u8 ntx_path;
+ u8 map_b;
+
+ if (chip->rf_path_num == 1) {
+ ntx_path = RF_A;
+ map_b = 0;
+ } else {
+ ntx_path = hal->antenna_tx ? hal->antenna_tx : RF_B;
+ map_b = hal->antenna_tx == RF_AB ? 1 : 0;
+ }
SET_CMC_TBL_NTX_PATH_EN(skb->data, ntx_path);
SET_CMC_TBL_PATH_MAP_A(skb->data, 0);
--
2.25.1
