Search Linux Wireless

Re: [PATCH v2 2/4] wifi: ath11k: push MU-MIMO params from hostapd to hardware

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Robert Marko <robert.marko@xxxxxxxxxx> writes:

> On Tue, Oct 18, 2022 at 11:28 PM Muna Sinada <quic_msinada@xxxxxxxxxxx> wrote:
>
>>
>> In the previous behaviour only HE IE in management frames are changed
>> regarding MU-MIMO configurations and not in hardware. Adding push of
>> MU-MIMO configurations to the hardware as well.
>>
>> This patch is dependant on mac80211 patchset:
>> https://patchwork.kernel.org/project/linux-wireless/list/?series=683322&state=%2A&archive=both
>>
>> Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00356-QCAHKSWPL_SILICONZ-1
>>
>> Co-developed-by: Anilkumar Kolli <quic_akolli@xxxxxxxxxxx>
>> Signed-off-by: Anilkumar Kolli <quic_akolli@xxxxxxxxxxx>
>> Signed-off-by: Muna Sinada <quic_msinada@xxxxxxxxxxx>

[...]

>> @@ -5369,6 +5491,10 @@ static int ath11k_mac_copy_he_cap(struct ath11k *ar,
>>
>>                 he_cap_elem->mac_cap_info[1] &=
>>                         IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_MASK;
>> +               he_cap_elem->phy_cap_info[0] &=
>> +                       ~IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G;
>> +               he_cap_elem->phy_cap_info[0] &=
>> +                       ~IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G;
>
> This is causing a regression for us in OpenWrt at least on IPQ8074 but
> probably on all ath11k-supported HW. Cause 80+80 and 160MHz support
> bits are being cleared here so 160MHz is not being advertised after
> this patch.

Oh man, not good. Robert, should we revert this patchset entirely? Of
course it would be better if Muna can submit quickly a fix, but I'm not
going to wait for long.

The patchset is in wireless-next at the moment and the commits from the
patchset are:

a96f10422e74 wifi: ath11k: modify accessor macros to match index size
38dfe775d0ab wifi: ath11k: push MU-MIMO params from hostapd to hardware
8077c1bbbc28 wifi: ath11k: move HE MCS mapper to a separate function
ebf82988f844 wifi: ath11k: generate rx and tx mcs maps for supported HE mcs

> I fail to understand why are 80+80 and 160 MHz feature flags being cleared?

Me neither. I missed that in my review.

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux