From: Johannes Berg <johannes.berg@xxxxxxxxx> With newer MLD firmware API we no longer need beacon timing information from the host, so disable TIMING_BEACON_ONLY. If MLO is enabled (currently only for testing), then we must not have DEAUTH_NEED_MGD_TX_PREP because mac80211 doesn't support it yet, we'll have to fix that later. Signed-off-by: Johannes Berg <johannes.berg@xxxxxxxxx> Signed-off-by: Gregory Greenman <gregory.greenman@xxxxxxxxx> --- drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c index c60aff0df801..c76c6b1f0218 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c @@ -291,17 +291,28 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm) ieee80211_hw_set(hw, SUPPORTS_PS); ieee80211_hw_set(hw, SUPPORTS_DYNAMIC_PS); ieee80211_hw_set(hw, AMPDU_AGGREGATION); - ieee80211_hw_set(hw, TIMING_BEACON_ONLY); ieee80211_hw_set(hw, CONNECTION_MONITOR); ieee80211_hw_set(hw, CHANCTX_STA_CSA); ieee80211_hw_set(hw, SUPPORT_FAST_XMIT); ieee80211_hw_set(hw, SUPPORTS_CLONED_SKBS); ieee80211_hw_set(hw, SUPPORTS_AMSDU_IN_AMPDU); ieee80211_hw_set(hw, NEEDS_UNIQUE_STA_ADDR); - ieee80211_hw_set(hw, DEAUTH_NEED_MGD_TX_PREP); ieee80211_hw_set(hw, SUPPORTS_VHT_EXT_NSS_BW); ieee80211_hw_set(hw, BUFF_MMPDU_TXQ); ieee80211_hw_set(hw, STA_MMPDU_TXQ); + + /* With MLD FW API, it tracks timing by itself, + * no need for any timing from the host + */ + if (!mvm->mld_api_is_used) + ieee80211_hw_set(hw, TIMING_BEACON_ONLY); + + /* We should probably have this, but mac80211 + * currently doesn't support it for MLO. + */ + if (!(hw->wiphy->flags & WIPHY_FLAG_SUPPORTS_MLO)) + ieee80211_hw_set(hw, DEAUTH_NEED_MGD_TX_PREP); + /* * On older devices, enabling TX A-MSDU occasionally leads to * something getting messed up, the command read from the FIFO -- 2.38.1
