This allows to tell the HW if a connection is made to a STA or an AP.
Add the implementation for the gen2 version.
Signed-off-by: Martin Kaistra <martin.kaistra@xxxxxxxxxxxxx>
---
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 9 ++++++---
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 11 ++++++-----
2 files changed, 12 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
index c06ad33645974..e78e0bbd23354 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
@@ -1280,6 +1280,9 @@ struct rtl8xxxu_rfregs {
#define H2C_JOIN_BSS_DISCONNECT 0
#define H2C_JOIN_BSS_CONNECT 1
+#define H2C_ROLE_STA 1
+#define H2C_ROLE_AP 2
+
/*
* H2C (firmware) commands differ between the older generation chips
* 8188[cr]u, 819[12]cu, and 8723au, and the more recent chips 8723bu,
@@ -1908,7 +1911,7 @@ struct rtl8xxxu_fileops {
u32 ramask, u8 rateid, int sgi, int txbw_40mhz,
u8 macid);
void (*report_connect) (struct rtl8xxxu_priv *priv,
- u8 macid, bool connect);
+ u8 macid, u8 role, bool connect);
void (*report_rssi) (struct rtl8xxxu_priv *priv, u8 macid, u8 rssi);
void (*fill_txdesc) (struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
struct ieee80211_tx_info *tx_info,
@@ -2012,9 +2015,9 @@ void rtl8xxxu_update_rate_mask(struct rtl8xxxu_priv *priv,
void rtl8xxxu_gen2_update_rate_mask(struct rtl8xxxu_priv *priv,
u32 ramask, u8 rateid, int sgi, int txbw_40mhz, u8 macid);
void rtl8xxxu_gen1_report_connect(struct rtl8xxxu_priv *priv,
- u8 macid, bool connect);
+ u8 macid, u8 role, bool connect);
void rtl8xxxu_gen2_report_connect(struct rtl8xxxu_priv *priv,
- u8 macid, bool connect);
+ u8 macid, u8 role, bool connect);
void rtl8xxxu_gen1_report_rssi(struct rtl8xxxu_priv *priv, u8 macid, u8 rssi);
void rtl8xxxu_gen2_report_rssi(struct rtl8xxxu_priv *priv, u8 macid, u8 rssi);
void rtl8xxxu_gen1_init_aggregation(struct rtl8xxxu_priv *priv);
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index 4209880d724be..5e36fddbbb488 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -4524,7 +4524,7 @@ void rtl8xxxu_gen2_update_rate_mask(struct rtl8xxxu_priv *priv,
}
void rtl8xxxu_gen1_report_connect(struct rtl8xxxu_priv *priv,
- u8 macid, bool connect)
+ u8 macid, u8 role, bool connect)
{
struct h2c_cmd h2c;
@@ -4541,7 +4541,7 @@ void rtl8xxxu_gen1_report_connect(struct rtl8xxxu_priv *priv,
}
void rtl8xxxu_gen2_report_connect(struct rtl8xxxu_priv *priv,
- u8 macid, bool connect)
+ u8 macid, u8 role, bool connect)
{
/*
* The firmware turns on the rate control when it knows it's
@@ -4557,6 +4557,7 @@ void rtl8xxxu_gen2_report_connect(struct rtl8xxxu_priv *priv,
else
h2c.media_status_rpt.parm &= ~BIT(0);
+ h2c.media_status_rpt.parm |= ((role << 4) & 0xf0);
h2c.media_status_rpt.macid = macid;
rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.media_status_rpt));
@@ -4886,13 +4887,13 @@ rtl8xxxu_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
rtl8xxxu_write16(priv, REG_BCN_PSR_RPT,
0xc000 | vif->cfg.aid);
- priv->fops->report_connect(priv, 0, true);
+ priv->fops->report_connect(priv, 0, H2C_ROLE_AP, true);
} else {
val8 = rtl8xxxu_read8(priv, REG_BEACON_CTRL);
val8 |= BEACON_DISABLE_TSF_UPDATE;
rtl8xxxu_write8(priv, REG_BEACON_CTRL, val8);
- priv->fops->report_connect(priv, 0, false);
+ priv->fops->report_connect(priv, 0, H2C_ROLE_AP, false);
}
}
@@ -4953,7 +4954,7 @@ static int rtl8xxxu_start_ap(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
dev_dbg(dev, "Start AP mode\n");
rtl8xxxu_set_bssid(priv, vif->bss_conf.bssid);
rtl8xxxu_write16(priv, REG_BCN_INTERVAL, vif->bss_conf.beacon_int);
- priv->fops->report_connect(priv, 0, true);
+ priv->fops->report_connect(priv, 0, 0, true);
return 0;
}
--
2.30.2
