> Issue: Though the Netgear AXE3000 (A8000) is based on the mt7921 > chipset because of the unique USB VID:PID combination this device > does not initialize/register. Thus making it not plug and play. > > Fix: Adds support for the Netgear AXE3000 (A8000) based on the Mediatek > mt7921au chipset. The method of action is adding the USD VID/PID > pair to the mt7921u_device_table[] array. > > Notes: A retail sample of the Netgear AXE3000 (A8000) yeilds the following > from lsusb D 0846:9060 NetGear, Inc. Wireless_Device. This pair > 0846:9060 VID:PID has been reported by other users on Github. > > Signed-off-by: Reese Russell <git@xxxxxxxxx> > --- > drivers/net/wireless/mediatek/mt76/mt7921/usb.c | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/usb.c b/drivers/net/wireless/mediatek/mt76/mt7921/usb.c > index 5321d20dcdcb..62e9728588f8 100644 > --- a/drivers/net/wireless/mediatek/mt76/mt7921/usb.c > +++ b/drivers/net/wireless/mediatek/mt76/mt7921/usb.c > @@ -15,6 +15,8 @@ > static const struct usb_device_id mt7921u_device_table[] = { > { USB_DEVICE_AND_INTERFACE_INFO(0x0e8d, 0x7961, 0xff, 0xff, 0xff), > .driver_info = (kernel_ulong_t)MT7921_FIRMWARE_WM }, > + { USB_DEVICE_AND_INTERFACE_INFO(0x0846, 0x9060, 0xff, 0xff, 0xff), > + .driver_info = (kernel_ulong_t)MT7921_FIRMWARE_WM }, > { }, > }; > > -- > 2.37.2 I can confirm this VID/PID needs to go into 6.1 LTS and the current testing version of the kernel as I am getting an increasing amount of traffic from users that have purchased the Netgear A8000. My site is github.com/morrownr/USB-WiFi Helping Linux users with USB WiFi is what we do. The OP could have added a comment to the patch showing the adapter that is causing this patch to be submitted. Maybe he can submit a v2 that can be expedited? Guidance? Nick github.com/morrownr/USB-WiFi