On 3/13/23 09:42, Bitterblue Smith wrote:
> Always run the entire init sequence (rtl8xxxu_init_device()) for
> RTL8192EU. It's what the vendor driver does too.
>
> This fixes a bug where the device is unable to connect after
> rebooting:
>
> wlp3s0f3u2: send auth to ... (try 1/3)
> wlp3s0f3u2: send auth to ... (try 2/3)
> wlp3s0f3u2: send auth to ... (try 3/3)
> wlp3s0f3u2: authentication with ... timed out
>
> Rebooting leaves the device powered on (partially? at least the
> firmware is still running), but not really in a working state.
>
> Cc: stable@xxxxxxxxxxxxxxx
> Signed-off-by: Bitterblue Smith <rtl8821cerfe2@xxxxxxxxx>
> ---
> drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c | 1 +
> 1 file changed, 1 insertion(+)
Acked-by: Jes Sorensen <jes@xxxxxxxxxxxxxxxxxx>
> diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
> index 0bd1b527b420..4498748164af 100644
> --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
> +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
> @@ -1820,6 +1820,7 @@ struct rtl8xxxu_fileops rtl8192eu_fops = {
> .rx_desc_size = sizeof(struct rtl8xxxu_rxdesc24),
> .has_s0s1 = 0,
> .gen2_thermal_meter = 1,
> + .needs_full_init = 1,
> .adda_1t_init = 0x0fc01616,
> .adda_1t_path_on = 0x0fc01616,
> .adda_2t_path_on_a = 0x0fc01616,
