Vincent Tremblay <vincent@xxxxxxxxxxxxx> writes: > Read qcom,coexist-support as a u32 instead of a u8 > > When we set the property to <1> in the DT (as specified in the doc), > "of_property_read_u8" read 0 instead of 1. This is because of the data format. > > By default <1> is written with 32 bits. > The problem is that the driver is trying to read a u8. > > The difference can be visualized using hexdump in a running device: > Default 32 bits output: > ======================= > 0000000 0000 0100 > 0000004 > > 8 bits output: > ============== > 0000000 0001 > 0000001 > > By changing "of_property_read_u8" by "of_property_read_u32", the driver > is aligned with the documentation and is able to read the value without > modifying the DT. > > The other solution would be to force the value in the DT to be saved as > an 8 bits value (qcom,coexist-support = /bits/ 8 <1>), > which is against the doc and less intuitive. > > Validation: > =========== > The patch was tested on a real device and we can see in the debug logs > that the feature is properly initialized: > > [ 109.102097] ath10k_ahb a000000.wifi: boot coex_support 1 coex_gpio_pin 52 > > Signed-off-by: Vincent Tremblay <vincent@xxxxxxxxxxxxx> What are the changes in v2? Please always include a list of changes, more info in the wiki below. -- https://patchwork.kernel.org/project/linux-wireless/list/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
