Hector Martin <marcan@xxxxxxxxx> wrote: > At least on BCM4387, the D11 cores are held in reset on cold startup and > firmware expects to release reset itself. Just assert reset here and let > firmware deassert it. Premature deassertion results in the firmware > failing to initialize properly some of the time, with strange AXI bus > errors. > > Also, BCM4387 has 3 cores, up from 2. The logic for handling that is in > brcmf_chip_ai_resetcore(), but since we aren't using that any more, just > handle it here. > > Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx> > Reviewed-by: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx> > Signed-off-by: Hector Martin <marcan@xxxxxxxxx> 10 patches applied to wireless-next.git, thanks. 3c7c07ca7ab1 wifi: brcmfmac: chip: Only disable D11 cores; handle an arbitrary number 098e0b105ce1 wifi: brcmfmac: chip: Handle 1024-unit sizes for TCM blocks 398ce273d6b1 wifi: brcmfmac: cfg80211: Add support for scan params v2 d75ef1f81e42 wifi: brcmfmac: feature: Add support for setting feats based on WLC version a96202acaea4 wifi: brcmfmac: cfg80211: Add support for PMKID_V3 operations 89b89e52153f wifi: brcmfmac: cfg80211: Pass the PMK in binary instead of hex 117ace4014cc wifi: brcmfmac: pcie: Add IDs/properties for BCM4387 dd7e55401fec wifi: brcmfmac: common: Add support for downloading TxCap blobs 75102b7543ed wifi: brcmfmac: pcie: Load and provide TxCap blobs 5b3ee9987f58 wifi: brcmfmac: common: Add support for external calibration blobs -- https://patchwork.kernel.org/project/linux-wireless/patch/20230214092423.15175-1-marcan@xxxxxxxxx/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
