On Wed, 2023-02-22 at 11:23 +0100, Lorenzo Bianconi wrote:
> > Enable two PCIe interfaces (dev->hif2) support for mt7916 when WED
> > is enabled.
> >
> > Signed-off-by: Sujuan Chen <sujuan.chen@xxxxxxxxxxxx>
> > ---
> > drivers/net/wireless/mediatek/mt76/mt7915/dma.c | 10 ++++++++--
> > drivers/net/wireless/mediatek/mt76/mt7915/mcu.c | 4 +++-
> > drivers/net/wireless/mediatek/mt76/mt7915/mmio.c | 10 +++++-----
> > 3 files changed, 16 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/dma.c
> > b/drivers/net/wireless/mediatek/mt76/mt7915/dma.c
> > index abe17dac9996..43a5456d4b97 100644
> > --- a/drivers/net/wireless/mediatek/mt76/mt7915/dma.c
> > +++ b/drivers/net/wireless/mediatek/mt76/mt7915/dma.c
> > @@ -87,8 +87,14 @@ static void mt7915_dma_config(struct mt7915_dev
> > *dev)
> > MT7916_RXQ_BAND0);
> > RXQ_CONFIG(MT_RXQ_MCU_WA, WFDMA0,
> > MT_INT_WED_RX_DONE_WA_MT7916,
> > MT7916_RXQ_MCU_WA);
> > - RXQ_CONFIG(MT_RXQ_BAND1, WFDMA0,
> > MT_INT_WED_RX_DONE_BAND1_MT7916,
> > - MT7916_RXQ_BAND1);
> > + if (dev->hif2)
> > + RXQ_CONFIG(MT_RXQ_BAND1, WFDMA0,
> > + MT_INT_RX_DONE_BAND1_MT7916,
> > + MT7916_RXQ_BAND1);
> > + else
> > + RXQ_CONFIG(MT_RXQ_BAND1, WFDMA0,
> > + MT_INT_WED_RX_DONE_BAND1_MT7
> > 916,
> > + MT7916_RXQ_BAND1);
> > RXQ_CONFIG(MT_RXQ_MAIN_WA, WFDMA0,
> > MT_INT_WED_RX_DONE_WA_MAIN_MT7916,
> > MT7916_RXQ_MCU_WA_MAIN);
> > TXQ_CONFIG(0, WFDMA0, MT_INT_WED_TX_DONE_BAND0,
> > diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
> > b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
> > index 5545a8bdf1d0..1dfbcc9bf755 100644
> > --- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
> > +++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
> > @@ -2370,7 +2370,9 @@ int mt7915_mcu_init_firmware(struct
> > mt7915_dev *dev)
> > if (ret)
> > return ret;
> >
> > - if (mtk_wed_device_active(&dev->mt76.mmio.wed) &&
> > is_mt7915(&dev->mt76))
> > + if ((mtk_wed_device_active(&dev->mt76.mmio.wed) &&
> > + is_mt7915(&dev->mt76)) ||
> > + (!mtk_wed_get_rx_capa(&dev->mt76.mmio.wed)))
>
> you do not need brackets around mtk_wed_get_rx_capa().
>
ack, will fix it in v3
Regards,
Sujuan
> Regards,
> Lorenzo
>
> > mt7915_mcu_wa_cmd(dev, MCU_WA_PARAM_CMD(CAPABILITY), 0,
> > 0, 0);
> >
> > ret = mt7915_mcu_set_mwds(dev, 1);
> > diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mmio.c
> > b/drivers/net/wireless/mediatek/mt76/mt7915/mmio.c
> > index 225a19604d3e..6f0c0e2ae045 100644
> > --- a/drivers/net/wireless/mediatek/mt76/mt7915/mmio.c
> > +++ b/drivers/net/wireless/mediatek/mt76/mt7915/mmio.c
> > @@ -989,13 +989,13 @@ irqreturn_t mt7915_irq_handler(int irq, void
> > *dev_instance)
> > struct mt7915_dev *dev = dev_instance;
> > struct mtk_wed_device *wed = &dev->mt76.mmio.wed;
> >
> > - if (mtk_wed_device_active(wed)) {
> > + if (mtk_wed_device_active(wed))
> > mtk_wed_device_irq_set_mask(wed, 0);
> > - } else {
> > + else
> > mt76_wr(dev, MT_INT_MASK_CSR, 0);
> > - if (dev->hif2)
> > - mt76_wr(dev, MT_INT1_MASK_CSR, 0);
> > - }
> > +
> > + if (dev->hif2)
> > + mt76_wr(dev, MT_INT1_MASK_CSR, 0);
> >
> > if (!test_bit(MT76_STATE_INITIALIZED, &dev->mphy.state))
> > return IRQ_NONE;
> > --
> > 2.18.0
> >
