Search Linux Wireless

Re: [PATCH v3 1/2] dt: bindings: net: ath11k: add dt entry for XO calibration support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 07/02/2023 11:36, Youghandhar Chintala wrote:
> Add dt binding to get XO calibration data support for Wi-Fi RF clock.
> 
> Retrieve the XO trim offset via system firmware (e.g., device tree),
> especially in the case where the device doesn't have a useful EEPROM
> on which to store the calibrated XO offset.
> Calibrated XO offset is sent to firmware, which compensate the RF clock
> drift by programing the XO trim register.
> 

And this is second v3 and still not fixed. The same as previous v3 and
previous v2 (???).

Best regards,
Krzysztof




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux