Search Linux Wireless

Re: [PATCH v3 1/2] dt: bindings: net: ath11k: add dt entry for XO calibration support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 07/02/2023 11:32, Youghandhar Chintala wrote:
> Add dt binding to get XO calibration data support for Wi-Fi RF clock.

This is a friendly reminder during the review process.

It seems my previous comments were not fully addressed. Maybe my
feedback got lost between the quotes, maybe you just forgot to apply it.
Please go back to the previous discussion and either implement all
requested changes or keep discussing them.

Several comments were ignored.

Use subject prefixes matching the subsystem (which you can get for
example with `git log --oneline -- DIRECTORY_OR_FILE` on the directory
your patch is touching).

Subject: drop second/last, redundant "dt entry for". The "dt-bindings"
prefix is already stating that these are bindings.

dt-bindings: net: qcom,ath11k: add XO frequency offset

> 
> Retrieve the XO trim offset via system firmware (e.g., device tree),
> especially in the case where the device doesn't have a useful EEPROM
> on which to store the calibrated XO offset.
> Calibrated XO offset is sent to firmware, which compensate the RF clock
> drift by programing the XO trim register.
> 
> Signed-off-by: Youghandhar Chintala <quic_youghand@xxxxxxxxxxx>
> ---
>  .../devicetree/bindings/net/wireless/qcom,ath11k.yaml         | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
> index f7cf135aa37f..4745251e70d4 100644
> --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
> +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
> @@ -41,6 +41,10 @@ properties:
>          * reg
>          * reg-names
>  
> +  xo-cal-data:
> +    description:
> +      XO frequency offset to program the XO trim register

This is a friendly reminder during the review process.

It seems my previous comments were not fully addressed. Maybe my
feedback got lost between the quotes, maybe you just forgot to apply it.
Please go back to the previous discussion and either implement all
requested changes or keep discussing them.

Thank you.

(missing type/ref, vendor prefix).


Best regards,
Krzysztof




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux