On 31/01/2023 23.17, Jonas Gorski wrote: > On Tue, 31 Jan 2023 at 12:36, Hector Martin <marcan@xxxxxxxxx> wrote: >> >> These device IDs are only supposed to be visible internally, in devices >> without a proper OTP. They should never be seen in devices in the wild, >> so drop them to avoid confusion. > > I think these can still show up in embedded platforms where the > OTP/SPROM is provided on-flash. > > E.g. https://forum.archive.openwrt.org/viewtopic.php?id=55367&p=4 > shows this bootlog on an BCM4709A0 router with two BCM43602 wifis: > > [ 3.237132] pci 0000:01:00.0: [14e4:aa52] type 00 class 0x028000 > [ 3.237174] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit] > [ 3.237199] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x003fffff 64bit] > [ 3.237302] pci 0000:01:00.0: supports D1 D2 > ... > [ 3.782384] pci 0001:03:00.0: [14e4:aa52] type 00 class 0x028000 > [ 3.782440] pci 0001:03:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit] > [ 3.782474] pci 0001:03:00.0: reg 0x18: [mem 0x00000000-0x003fffff 64bit] > [ 3.782649] pci 0001:03:00.0: supports D1 D2 > > 0xaa52 == 43602 (BRCM_PCIE_43602_RAW_DEVICE_ID) > > Rafał can probably provide more info there. > > Regards > Jonas > Arend, any comments on these platforms? - Hector
