Search Linux Wireless

[PATCH v4 2/4] wifi: nl80211: validate and configure puncturing bitmap

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



- New feature flag, NL80211_EXT_FEATURE_PUNCTURING, to advertise
driver support for preamble puncturing.
- New attribute, NL80211_ATTR_PUNCT_BITMAP, to receive a puncturing
bitmap from the userspace during AP bring up (NL80211_CMD_START_AP)
and channel switch (NL80211_CMD_CHANNEL_SWITCH) operations. Each bit
corresponds to a 20 MHz channel in the operating bandwidth, lowest bit
for the lowest channel. Bit set to 1 indicates that the channel is
punctured. Higher 16 bits are reserved.
- New members added to structures cfg80211_ap_settings and
cfg80211_csa_settings to propagate the bitmap to MAC80211 after
validation.

Signed-off-by: Aloka Dixit <quic_alokad@xxxxxxxxxxx>
Signed-off-by: Muna Sinada <quic_msinada@xxxxxxxxxxx>
---
 include/net/cfg80211.h       |  8 ++++++++
 include/uapi/linux/nl80211.h | 12 ++++++++++++
 net/wireless/nl80211.c       | 38 ++++++++++++++++++++++++++++++++++++
 3 files changed, 58 insertions(+)

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 505a1072b5b4..f70f28776dc0 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1316,6 +1316,9 @@ struct cfg80211_unsol_bcast_probe_resp {
  * @fils_discovery: FILS discovery transmission parameters
  * @unsol_bcast_probe_resp: Unsolicited broadcast probe response parameters
  * @mbssid_config: AP settings for multiple bssid
+ * @punct_bitmap: Preamble puncturing bitmap. Each bit represents
+ *	a 20 MHz channel, lowest bit corresponding to the lowest channel.
+ *	Bit set to 1 indicates that the channel is punctured.
  */
 struct cfg80211_ap_settings {
 	struct cfg80211_chan_def chandef;
@@ -1350,6 +1353,7 @@ struct cfg80211_ap_settings {
 	struct cfg80211_fils_discovery fils_discovery;
 	struct cfg80211_unsol_bcast_probe_resp unsol_bcast_probe_resp;
 	struct cfg80211_mbssid_config mbssid_config;
+	u16 punct_bitmap;
 };
 
 /**
@@ -1367,6 +1371,9 @@ struct cfg80211_ap_settings {
  * @radar_required: whether radar detection is required on the new channel
  * @block_tx: whether transmissions should be blocked while changing
  * @count: number of beacons until switch
+ * @punct_bitmap: Preamble puncturing bitmap. Each bit represents
+ *	a 20 MHz channel, lowest bit corresponding to the lowest channel.
+ *	Bit set to 1 indicates that the channel is punctured.
  */
 struct cfg80211_csa_settings {
 	struct cfg80211_chan_def chandef;
@@ -1379,6 +1386,7 @@ struct cfg80211_csa_settings {
 	bool radar_required;
 	bool block_tx;
 	u8 count;
+	u16 punct_bitmap;
 };
 
 /**
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 8ecb0fbee721..4dfd6990fa97 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -2752,6 +2752,12 @@ enum nl80211_commands {
  *	the incoming frame RX timestamp.
  * @NL80211_ATTR_TD_BITMAP: Transition Disable bitmap, for subsequent
  *	(re)associations.
+ *
+ * @NL80211_ATTR_PUNCT_BITMAP: (u32) Preamble puncturing bitmap, lowest
+ *	bit corresponds to the lowest 20 MHz channel. Each bit set to 1
+ *	indicates that the sub-channel is punctured. Higher 16 bits are
+ *	reserved.
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -3281,6 +3287,8 @@ enum nl80211_attrs {
 	NL80211_ATTR_RX_HW_TIMESTAMP,
 	NL80211_ATTR_TD_BITMAP,
 
+	NL80211_ATTR_PUNCT_BITMAP,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -6296,6 +6304,8 @@ enum nl80211_feature_flags {
  *	might apply, e.g. no scans in progress, no offchannel operations
  *	in progress, and no active connections.
  *
+ * @NL80211_EXT_FEATURE_PUNCT: Driver supports preamble puncturing in AP mode.
+ *
  * @NUM_NL80211_EXT_FEATURES: number of extended features.
  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
  */
@@ -6365,6 +6375,8 @@ enum nl80211_ext_feature_index {
 	NL80211_EXT_FEATURE_RADAR_BACKGROUND,
 	NL80211_EXT_FEATURE_POWERED_ADDR_CHANGE,
 
+	NL80211_EXT_FEATURE_PUNCT,
+
 	/* add new features before the definition below */
 	NUM_NL80211_EXT_FEATURES,
 	MAX_NL80211_EXT_FEATURES = NUM_NL80211_EXT_FEATURES - 1
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 64cf6110ce9d..d2219f43a2ea 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -805,6 +805,7 @@ static const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
 	[NL80211_ATTR_MLD_ADDR] = NLA_POLICY_EXACT_LEN(ETH_ALEN),
 	[NL80211_ATTR_MLO_SUPPORT] = { .type = NLA_FLAG },
 	[NL80211_ATTR_MAX_NUM_AKM_SUITES] = { .type = NLA_REJECT },
+	[NL80211_ATTR_PUNCT_BITMAP] = { .type = NLA_U32 },
 };
 
 /* policy for the key attributes */
@@ -3173,6 +3174,27 @@ static bool nl80211_can_set_dev_channel(struct wireless_dev *wdev)
 		wdev->iftype == NL80211_IFTYPE_P2P_GO;
 }
 
+static int nl80211_parse_punct_bitmap(struct cfg80211_registered_device *rdev,
+				      struct genl_info *info,
+				      const struct cfg80211_chan_def *chandef,
+				      u16 *punct_bitmap)
+{
+	u32 bitmap;
+
+	if (!wiphy_ext_feature_isset(&rdev->wiphy, NL80211_EXT_FEATURE_PUNCT))
+		return -EINVAL;
+
+	bitmap = nla_get_u32(info->attrs[NL80211_ATTR_PUNCT_BITMAP]);
+	if (bitmap & 0xFFFF0000)
+		return -EINVAL;
+
+	*punct_bitmap = bitmap;
+	if (!cfg80211_valid_disable_subchannel_bitmap(punct_bitmap, chandef))
+		return -EINVAL;
+
+	return 0;
+}
+
 int nl80211_parse_chandef(struct cfg80211_registered_device *rdev,
 			  struct genl_info *info,
 			  struct cfg80211_chan_def *chandef)
@@ -5918,6 +5940,14 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info)
 		goto out;
 	}
 
+	if (info->attrs[NL80211_ATTR_PUNCT_BITMAP]) {
+		err = nl80211_parse_punct_bitmap(rdev, info,
+						 &params->chandef,
+						 &params->punct_bitmap);
+		if (err)
+			goto out;
+	}
+
 	if (!cfg80211_reg_can_beacon_relax(&rdev->wiphy, &params->chandef,
 					   wdev->iftype)) {
 		err = -EINVAL;
@@ -10057,6 +10087,14 @@ static int nl80211_channel_switch(struct sk_buff *skb, struct genl_info *info)
 	if (info->attrs[NL80211_ATTR_CH_SWITCH_BLOCK_TX])
 		params.block_tx = true;
 
+	if (info->attrs[NL80211_ATTR_PUNCT_BITMAP]) {
+		err = nl80211_parse_punct_bitmap(rdev, info,
+						 &params.chandef,
+						 &params.punct_bitmap);
+		if (err)
+			goto free;
+	}
+
 	wdev_lock(wdev);
 	err = rdev_channel_switch(rdev, dev, &params);
 	wdev_unlock(wdev);
-- 
2.39.0




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux