Search Linux Wireless

[Bug] iwlwifi microcode error

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi all,

Recently, the network card on my laptop (AX201) started to lose the wifi 3 or 4
times a day. When it happens, the only way I have to reconnect is to restart my
network manager.

I found in dmesg the following:

iwlwifi 0000:00:14.3: Microcode SW error detected. Restarting 0x0.
iwlwifi 0000:00:14.3: Start IWL Error Log Dump:
iwlwifi 0000:00:14.3: Transport status: 0x0000004A, valid: 6
iwlwifi 0000:00:14.3: Loaded firmware version: 71.058653f6.0 QuZ-a0-hr-b0-71.ucode
iwlwifi 0000:00:14.3: 0x00000071 | NMI_INTERRUPT_UMAC_FATAL    
iwlwifi 0000:00:14.3: 0x0000A200 | trm_hw_status0
iwlwifi 0000:00:14.3: 0x00000000 | trm_hw_status1
iwlwifi 0000:00:14.3: 0x004CBE06 | branchlink2
iwlwifi 0000:00:14.3: 0x0001AB16 | interruptlink1
iwlwifi 0000:00:14.3: 0x0001AB16 | interruptlink2
iwlwifi 0000:00:14.3: 0x004C3E98 | data1
iwlwifi 0000:00:14.3: 0x00001000 | data2
iwlwifi 0000:00:14.3: 0x00000000 | data3
iwlwifi 0000:00:14.3: 0x96800FF7 | beacon time
iwlwifi 0000:00:14.3: 0x424B6011 | tsf low
iwlwifi 0000:00:14.3: 0x000001FB | tsf hi
iwlwifi 0000:00:14.3: 0x00000000 | time gp1
iwlwifi 0000:00:14.3: 0xACE77E1C | time gp2
iwlwifi 0000:00:14.3: 0x00000001 | uCode revision type
iwlwifi 0000:00:14.3: 0x00000047 | uCode version major
iwlwifi 0000:00:14.3: 0x058653F6 | uCode version minor
iwlwifi 0000:00:14.3: 0x00000351 | hw version
iwlwifi 0000:00:14.3: 0x00489001 | board version
iwlwifi 0000:00:14.3: 0x8008FC03 | hcmd
iwlwifi 0000:00:14.3: 0x24020000 | isr0
iwlwifi 0000:00:14.3: 0x01000000 | isr1
iwlwifi 0000:00:14.3: 0x08F04002 | isr2
iwlwifi 0000:00:14.3: 0x04C3200C | isr3
iwlwifi 0000:00:14.3: 0x00000000 | isr4
iwlwifi 0000:00:14.3: 0x04B1001C | last cmd Id
iwlwifi 0000:00:14.3: 0x004C3E98 | wait_event
iwlwifi 0000:00:14.3: 0x000002C8 | l2p_control
iwlwifi 0000:00:14.3: 0x00018014 | l2p_duration
iwlwifi 0000:00:14.3: 0x000000BF | l2p_mhvalid
iwlwifi 0000:00:14.3: 0x000000EF | l2p_addr_match
iwlwifi 0000:00:14.3: 0x00000008 | lmpm_pmg_sel
iwlwifi 0000:00:14.3: 0x00000000 | timestamp
iwlwifi 0000:00:14.3: 0x0000D0A0 | flow_handler
iwlwifi 0000:00:14.3: Start IWL Error Log Dump:
iwlwifi 0000:00:14.3: Transport status: 0x0000004A, valid: 7
iwlwifi 0000:00:14.3: 0x20003463 | ADVANCED_SYSASSERT
iwlwifi 0000:00:14.3: 0x00000000 | umac branchlink1
iwlwifi 0000:00:14.3: 0x80455B7C | umac branchlink2
iwlwifi 0000:00:14.3: 0xC0081200 | umac interruptlink1
iwlwifi 0000:00:14.3: 0x00000000 | umac interruptlink2
iwlwifi 0000:00:14.3: 0x424B6003 | umac data1
iwlwifi 0000:00:14.3: 0xACE77E0D | umac data2
iwlwifi 0000:00:14.3: 0x96653FD6 | umac data3
iwlwifi 0000:00:14.3: 0x00000047 | umac major
iwlwifi 0000:00:14.3: 0x058653F6 | umac minor
iwlwifi 0000:00:14.3: 0xACE77E16 | frame pointer
iwlwifi 0000:00:14.3: 0xC0885E00 | stack pointer
iwlwifi 0000:00:14.3: 0x0023010C | last host cmd
iwlwifi 0000:00:14.3: 0x00000000 | isr status reg
iwlwifi 0000:00:14.3: IML/ROM dump:
iwlwifi 0000:00:14.3: 0x00000003 | IML/ROM error/state
iwlwifi 0000:00:14.3: 0x00005710 | IML/ROM data1
iwlwifi 0000:00:14.3: 0x00000080 | IML/ROM WFPM_AUTH_KEY_0
iwlwifi 0000:00:14.3: Fseq Registers:
iwlwifi 0000:00:14.3: 0x60000000 | FSEQ_ERROR_CODE
iwlwifi 0000:00:14.3: 0x80290033 | FSEQ_TOP_INIT_VERSION
iwlwifi 0000:00:14.3: 0x00090006 | FSEQ_CNVIO_INIT_VERSION
iwlwifi 0000:00:14.3: 0x0000A482 | FSEQ_OTP_VERSION
iwlwifi 0000:00:14.3: 0x00000003 | FSEQ_TOP_CONTENT_VERSION
iwlwifi 0000:00:14.3: 0x4552414E | FSEQ_ALIVE_TOKEN
iwlwifi 0000:00:14.3: 0x20000302 | FSEQ_CNVI_ID
iwlwifi 0000:00:14.3: 0x01300504 | FSEQ_CNVR_ID
iwlwifi 0000:00:14.3: 0x20000302 | CNVI_AUX_MISC_CHIP
iwlwifi 0000:00:14.3: 0x01300504 | CNVR_AUX_MISC_CHIP
iwlwifi 0000:00:14.3: 0x05B0905B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM
iwlwifi 0000:00:14.3: 0x0000025B | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR
iwlwifi 0000:00:14.3: WRT: Collecting data: ini trigger 4 fired (delay=0ms).
ieee80211 phy0: Hardware restart was requested

This seems to only happen when I'm connected to a 802.11e capable router and
after my firmware has been upgraded from 20210818-1 to 20221012-1.

Is that a known issue?

-- 
Vincent



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux