Currently, during channel switch, deflink (or link_id 0) is always considered. However, with Multi-Link Operation (MLO), there is a need to handle link specific data structures based on the actual operational link_id during channel switch operation. Hence, add support for the same. Non-MLO based operations will use link_id as 0 or deflink member as applicable. Aditya Kumar Singh (2): wifi: cfg80211/mac80211: add support for channel switch with MLO wifi: mac80211: update beacon counters per link basis drivers/net/wireless/ath/ath10k/mac.c | 4 +- drivers/net/wireless/ath/ath10k/wmi.c | 2 +- drivers/net/wireless/ath/ath11k/mac.c | 2 +- drivers/net/wireless/ath/ath11k/wmi.c | 2 +- drivers/net/wireless/ath/ath9k/beacon.c | 2 +- .../net/wireless/ath/ath9k/htc_drv_beacon.c | 2 +- .../net/wireless/intel/iwlwifi/mvm/mac-ctxt.c | 6 +- .../wireless/intel/iwlwifi/mvm/time-event.c | 2 +- drivers/net/wireless/mac80211_hwsim.c | 2 +- .../net/wireless/marvell/mwifiex/cfg80211.c | 3 +- drivers/net/wireless/mediatek/mt76/mac80211.c | 2 +- .../net/wireless/mediatek/mt76/mt7615/mcu.c | 2 +- .../net/wireless/mediatek/mt76/mt7915/mcu.c | 2 +- .../net/wireless/mediatek/mt76/mt7996/mcu.c | 2 +- drivers/net/wireless/ti/wlcore/event.c | 2 +- include/net/cfg80211.h | 3 +- include/net/mac80211.h | 7 +- net/mac80211/cfg.c | 151 +++++++++++------- net/mac80211/ibss.c | 2 +- net/mac80211/ieee80211_i.h | 3 +- net/mac80211/mesh.c | 2 +- net/mac80211/tx.c | 14 +- net/wireless/nl80211.c | 2 +- net/wireless/rdev-ops.h | 7 +- net/wireless/trace.h | 12 +- 25 files changed, 150 insertions(+), 90 deletions(-) base-commit: d0e99511834b6828c960e978d9a8cb6e5731250d -- 2.17.1
