Search Linux Wireless

[PATCH 2/3] wifi: ath9k: stop loading incompatible DT cal data

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Loading calibration data from an OF device tree node not declared
compatible with the device (e.g. a PCI device with calibration data
from corresponding DT node gets replaced, so the newly installed
device become incompatible with the node) or driver may lead to fatal
result, e.g. kernel panic.

The driver should check whether the DT node corresponding to the
device compatible with it, and load calibration data only from
compatible node.

Signed-off-by: Edward Chow <equu@xxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/ath9k.h | 1 +
drivers/net/wireless/ath/ath9k/init.c | 26 ++++++++++++++++++++++++++
drivers/net/wireless/ath/ath9k/pci.c | 2 +-
3 files changed, 28 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 2cc23605c9fc..4f6f0383a5f8 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -35,6 +35,7 @@ struct ath_node;
struct ath_vif;
extern struct ieee80211_ops ath9k_ops;
+extern struct pci_driver ath_pci_driver;
extern int ath9k_modparam_nohwcrypt;
extern int ath9k_led_blink;
extern bool is_ath9k_unloaded;
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 4f00400c7ffb..f88a48e8456b 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -22,6 +22,7 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_net.h>
+#include <linux/pci.h>
#include <linux/nvmem-consumer.h>
#include <linux/relay.h>
#include <linux/dmi.h>
@@ -577,6 +578,31 @@ static int ath9k_nvmem_request_eeprom(struct ath_softc *sc)
size_t len;
int err;
+ /* devm_nvmem_cell_get() will get a cell first from the OF
+ * DT node representing the given device with nvmem-cell-name
+ * "calibration", and from the global lookup table as a fallback,
+ * and an ath9k device could be either a pci one or a platform one.
+ *
+ * If the OF DT node is not compatible with the real device, the
+ * calibration data got from the node should not be applied.
+ *
+ * dev_is_pci(sc->dev) && ( no OF node || caldata not from node
+ * || not compatible ) -> do not use caldata .
+ *
+ * !dev_is_pci(sc->dev) -> always use caldata .
+ */
+ if (dev_is_pci(sc->dev) &&
+ (!sc->dev->of_node ||
+ !of_property_match_string(sc->dev->of_node,
+ "nvmem-cell-names",
+ "calibration") ||
+ !of_pci_node_match_driver(sc->dev->of_node,
+ &ath_pci_driver)))
+ /* follow the "just return 0;" convention as
+ * noted below.
+ */
+ return 0;
+
cell = devm_nvmem_cell_get(sc->dev, "calibration");
if (IS_ERR(cell)) {
err = PTR_ERR(cell);
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index a074e23013c5..fcb19761e60d 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -1074,7 +1074,7 @@ static SIMPLE_DEV_PM_OPS(ath9k_pm_ops, ath_pci_suspend, ath_pci_resume);
MODULE_DEVICE_TABLE(pci, ath_pci_id_table);
-static struct pci_driver ath_pci_driver = {
+struct pci_driver ath_pci_driver = {
.name = "ath9k",
.id_table = ath_pci_id_table,
.probe = ath_pci_probe,

--
2.39.0




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux