Search Linux Wireless

Re: [PATCH] ath11k: debugfs: fix to work with multiple PCI devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Robert Marko <robert.marko@xxxxxxxxxx> writes:

> On Tue, Dec 20, 2022 at 1:16 PM Kalle Valo <kvalo@xxxxxxxxxx> wrote:
>>
>> From: Kalle Valo <quic_kvalo@xxxxxxxxxxx>
>>
>> ath11k fails to load if there are multiple ath11k PCI devices with same name:
>>
>>  ath11k_pci 0000:01:00.0: Hardware name qcn9074 hw1.0
>>  debugfs: Directory 'ath11k' with parent '/' already present!
>>  ath11k_pci 0000:01:00.0: failed to create ath11k debugfs
>>  ath11k_pci 0000:01:00.0: failed to create soc core: -17
>>  ath11k_pci 0000:01:00.0: failed to init core: -17
>>  ath11k_pci: probe of 0000:01:00.0 failed with error -17
>>
>> Fix this by creating a directory for each ath11k device using schema
>> <bus>-<devname>, for example "pci-0000:06:00.0". This directory created under
>> the top-level ath11k directory, for example /sys/kernel/debug/ath11k.
>>
>> The reference to the toplevel ath11k directory is not stored anymore within ath11k, instead
>> it's retrieved using debugfs_lookup(). If the directory does not exist it will
>> be created. After the last directory from the ath11k directory is removed, for
>> example when doing rmmod ath11k, the empty ath11k directory is left in place,
>> it's a minor cosmetic issue anyway.
>>
>> Here's an example hierarchy with one WCN6855:
>>
>> ath11k
>> `-- pci-0000:06:00.0
>>     |-- mac0
>>     |   |-- dfs_block_radar_events
>>     |   |-- dfs_simulate_radar
>>     |   |-- ext_rx_stats
>>     |   |-- ext_tx_stats
>>     |   |-- fw_dbglog_config
>>     |   |-- fw_stats
>>     |   |   |-- beacon_stats
>>     |   |   |-- pdev_stats
>>     |   |   `-- vdev_stats
>>     |   |-- htt_stats
>>     |   |-- htt_stats_reset
>>     |   |-- htt_stats_type
>>     |   `-- pktlog_filter
>>     |-- simulate_fw_crash
>>     `-- soc_dp_stats
>>
>> I didn't have a test setup where I could connect multiple ath11k devices to the
>> same the host, so I have only tested this with one device.
>>
>> Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.9
>
>
> I can confirm that this works on a combination of IPQ8074 with an
> external QCN9074 radio which would previously clash and error out, so:
>
> Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1
> Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1
> Tested-by: Robert Marko <robert.marko@xxxxxxxxxx>

Great, thank you for testing this. Very much appreciated. I added the
tags tags to the commit.

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux