On 01-06 21:13, Hector Martin wrote:
>
> On 2023/01/06 18:27, Hector Martin wrote:
> > On 2023/01/06 16:27, Ivan T. Ivanov wrote:
> >> When "brcm,board-type" is not explicitly set in devicetree
> >> fallback to board compatible string for board type.
> >>
> >> Some of the existing devices rely on the most compatible device
> >> string to find best firmware files, including Raspberry PI's[1].
> >>
> >> Fixes: 7682de8b3351 ("wifi: brcmfmac: of: Fetch Apple properties")
> >>
> >> [1] https://bugzilla.opensuse.org/show_bug.cgi?id=1206697#c13
> >>
> >> Signed-off-by: Ivan T. Ivanov <iivanov@xxxxxxx>
> >
> > The existing code already falls back to the compatible string, *as long
> > as there is no board_type set already*.
> >
> > As far as I can tell, the only way the board_type can get another value
> > first is if it comes from DMI. This behavior was inadvertently changed
> > by commit 7682de8b3351 (since I was not expecting platforms to have
> > *both* DT and DMI information).
> >
> > I'm guessing the Raspberry Pi is one such platform, and
> > `/sys/devices/virtual/dmi` exists? Hybrid UEFI+ACPI+DT platform I take it?
> >
> > If so, your commit description should probably be something like:
> >
> > ===
> > brcmfmac: Prefer DT board type over DMI board type
> >
> > The introduction of support for Apple board types inadvertently changed
> > the precedence order, causing hybrid ACPI+DT platforms to look up the
> > firmware using the DMI information instead of the device tree compatible
> > to generate the board type. Revert back to the old behavior,
> > as affected platforms use firmwares named after the DT compatible.
> >
> > Fixes: 7682de8b3351 ("wifi: brcmfmac: of: Fetch Apple properties")
> > ===
> >
> > An also add a Cc: stable@xxxxxxxxxxxxxxx to make sure this gets backported.
> >
> > With the fixed description,
> >
> > Reviewed-by: Hector Martin <marcan@xxxxxxxxx>
> >
> > - Hector
>
> Looking into this a bit more from what was mentioned in the linked bug,
> the DMI data comes from the SMBIOS table. We don't have that on Apple
> platforms even though we also boot via U-Boot+EFI, but I'm guessing you
> build U-Boot with CONFIG_GENERATE_SMBIOS_TABLE and provide that stuff in
> the DT?
Yes, that is the way in openSUSE case.
> So s/ACPI/SMBIOS/ would be more accurate in the commit message.
Sure, I will rewrite commit message and repost.
Thanks!
