Hi Peter,
Am 31.12.22 um 16:58 schrieb Peter Robinson:
Hi Stefan,
could you please provide a "bad case" file list of all firmware files
for the Raspberry Pi 3 B+ which worked before Linux 6.1, so i can
reproduce it?
What do you mean by the file list?
if you look into the firmware directory which files for
brcmfmac43455-sdio do you have? Just the bin file?
I'm using the rootfs of Raspberry Pi OS which contains:
$ ls brcmfmac43455-sdio*
brcmfmac43455-sdio.bin brcmfmac43455-sdio.clm_blob brcmfmac43455-sdio.txt
i temporary moved the clm_blob and txt file from the directory and
switched to Linux v6.0 (multi_v7_defconfig), but the driver doesn't probe:
[ 25.943350] brcmfmac: brcmf_fw_alloc_request: using
brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 25.943550] brcmfmac mmc1:0001:1: Direct firmware load for
brcm/brcmfmac43455-sdio.raspberrypi,3-model-b-plus.bin failed with error -2
[ 26.071070] brcmfmac mmc1:0001:1: Direct firmware load for
brcm/brcmfmac43455-sdio.raspberrypi,3-model-b-plus.txt failed with error -2
[ 26.071133] brcmfmac mmc1:0001:1: Direct firmware load for
brcm/brcmfmac43455-sdio.txt failed with error -2
[ 27.078481] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000):
clkctl 0x50
[ 25.943350] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 25.943550] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,3-model-b-plus.bin failed with error -2
[ 26.071070] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,3-model-b-plus.txt failed with error -2
[ 26.071133] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.txt failed with error -2
[ 27.078481] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
As shipped in https://mirrors.edge.kernel.org/pub/linux/kernel/firmware/
either the Nov or Dec releases
The kernel supports compressing firmware with: xz -C crc32 "$f"
Regards,
Peter
I didn't say please add some files, i only need a test scenario :-)
We're running the latest upstream
firmware, we do used compressed firmware but that hasn't regressed
with any of the other firmware, this is very much brcmfmac. With the
same firmware it was working on 6.0.x and reboot into a 6.1+ kernel
and it stops with nothing else changed.
Yes, i agree this is a regression and yes it's definitely brcmfmac, but
based on your bug report i wasn't able to reproduce.
Regards
Also OpenSuSE seems to be affected [1].
[1] - https://bugzilla.suse.com/show_bug.cgi?id=1206697
Regards
Stefan
