After filling calibration parameters, set BIT(0) to enable the hardware
circuit, but original set incorrect bit that affects a little TX
performance.
Fixes: 76599a8d0b7d ("rtw89: 8852c: rfk: add DACK")
Signed-off-by: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
---
drivers/net/wireless/realtek/rtw89/rtw8852c_rfk.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/realtek/rtw89/rtw8852c_rfk.c b/drivers/net/wireless/realtek/rtw89/rtw8852c_rfk.c
index 60cd676fe22c9..f5b0b57f33207 100644
--- a/drivers/net/wireless/realtek/rtw89/rtw8852c_rfk.c
+++ b/drivers/net/wireless/realtek/rtw89/rtw8852c_rfk.c
@@ -337,7 +337,7 @@ static void _dack_reload_by_path(struct rtw89_dev *rtwdev,
(dack->dadck_d[path][index] << 14);
addr = 0xc210 + offset;
rtw89_phy_write32(rtwdev, addr, val32);
- rtw89_phy_write32_set(rtwdev, addr, BIT(1));
+ rtw89_phy_write32_set(rtwdev, addr, BIT(0));
}
static void _dack_reload(struct rtw89_dev *rtwdev, enum rtw89_rf_path path)
--
2.25.1
