Just because priv->cck_agc_report_type is only one bit doesn't mean
it works like a bool. The value assigned to it loses all bits except
bit 0, so only assign 0 or 1 to it.
This affects the RTL8192EU, but rtl8xxxu already can't connect to any
networks with this chip, so it probably didn't bother anyone.
Fixes: 2ad2a813b803 ("wifi: rtl8xxxu: Fix the CCK RSSI calculation")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@xxxxxxxxx>
---
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index 3ed435401e57..799b03ec1980 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -4208,10 +4208,12 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
* should be equal or CCK RSSI report may be incorrect
*/
val32 = rtl8xxxu_read32(priv, REG_FPGA0_XA_HSSI_PARM2);
- priv->cck_agc_report_type = val32 & FPGA0_HSSI_PARM2_CCK_HIGH_PWR;
+ priv->cck_agc_report_type =
+ u32_get_bits(val32, FPGA0_HSSI_PARM2_CCK_HIGH_PWR);
val32 = rtl8xxxu_read32(priv, REG_FPGA0_XB_HSSI_PARM2);
- if (priv->cck_agc_report_type != (bool)(val32 & FPGA0_HSSI_PARM2_CCK_HIGH_PWR)) {
+ if (priv->cck_agc_report_type !=
+ u32_get_bits(val32, FPGA0_HSSI_PARM2_CCK_HIGH_PWR)) {
if (priv->cck_agc_report_type)
val32 |= FPGA0_HSSI_PARM2_CCK_HIGH_PWR;
else
--
2.38.0
