Enable thermal management by default shall not be executed during mcu
init. This causes thermal configuration being reset to the firmware
default settings.
Fixes: c67df0d3130a ("mt76: mt7915e: Enable thermal management by default")
Signed-off-by: Howard Hsu <howard-yh.hsu@xxxxxxxxxxxx>
---
drivers/net/wireless/mediatek/mt76/mt7915/init.c | 3 +--
drivers/net/wireless/mediatek/mt76/mt7915/main.c | 5 +++++
2 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/init.c b/drivers/net/wireless/mediatek/mt76/mt7915/init.c
index abeecf15f1c8..8f4561eed5db 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/init.c
@@ -204,8 +204,7 @@ static int mt7915_thermal_init(struct mt7915_phy *phy)
phy->throttle_temp[0] = 110;
phy->throttle_temp[1] = 120;
- return mt7915_mcu_set_thermal_throttling(phy,
- MT7915_THERMAL_THROTTLE_MAX);
+ return 0;
}
static void mt7915_led_set_config(struct led_classdev *led_cdev,
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/main.c b/drivers/net/wireless/mediatek/mt76/mt7915/main.c
index 0511d6a505b0..fc87216e40b1 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/main.c
@@ -57,6 +57,11 @@ int mt7915_run(struct ieee80211_hw *hw)
mt7915_mac_enable_nf(dev, phy->mt76->band_idx);
}
+ ret = mt7915_mcu_set_thermal_throttling(phy, MT7915_THERMAL_THROTTLE_MAX);
+
+ if (ret)
+ goto out;
+
ret = mt76_connac_mcu_set_rts_thresh(&dev->mt76, 0x92b,
phy->mt76->band_idx);
if (ret)
--
2.18.0
