From: Kalle Valo <quic_kvalo@xxxxxxxxxxx>
(Patches split into one patch per file for easier review, but the final
commit will be one big patch. See the cover letter for more info.)
Signed-off-by: Kalle Valo <quic_kvalo@xxxxxxxxxxx>
---
drivers/net/wireless/ath/ath12k/rx_desc.h | 1441 +++++++++++++++++++++++++++++
1 file changed, 1441 insertions(+)
diff --git a/drivers/net/wireless/ath/ath12k/rx_desc.h b/drivers/net/wireless/ath/ath12k/rx_desc.h
new file mode 100644
index 000000000000..5feaff6450ad
--- /dev/null
+++ b/drivers/net/wireless/ath/ath12k/rx_desc.h
@@ -0,0 +1,1441 @@
+/* SPDX-License-Identifier: BSD-3-Clause-Clear */
+/*
+ * Copyright (c) 2018-2021 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+#ifndef ATH12K_RX_DESC_H
+#define ATH12K_RX_DESC_H
+
+enum rx_desc_decap_type {
+ RX_DESC_DECAP_TYPE_RAW,
+ RX_DESC_DECAP_TYPE_NATIVE_WIFI,
+ RX_DESC_DECAP_TYPE_ETHERNET2_DIX,
+ RX_DESC_DECAP_TYPE_8023,
+};
+
+enum rx_desc_decrypt_status_code {
+ RX_DESC_DECRYPT_STATUS_CODE_OK,
+ RX_DESC_DECRYPT_STATUS_CODE_UNPROTECTED_FRAME,
+ RX_DESC_DECRYPT_STATUS_CODE_DATA_ERR,
+ RX_DESC_DECRYPT_STATUS_CODE_KEY_INVALID,
+ RX_DESC_DECRYPT_STATUS_CODE_PEER_ENTRY_INVALID,
+ RX_DESC_DECRYPT_STATUS_CODE_OTHER,
+};
+
+#define RX_MPDU_START_INFO0_REO_DEST_IND GENMASK(4, 0)
+#define RX_MPDU_START_INFO0_LMAC_PEER_ID_MSB GENMASK(6, 5)
+#define RX_MPDU_START_INFO0_FLOW_ID_TOEPLITZ BIT(7)
+#define RX_MPDU_START_INFO0_PKT_SEL_FP_UCAST_DATA BIT(8)
+#define RX_MPDU_START_INFO0_PKT_SEL_FP_MCAST_DATA BIT(9)
+#define RX_MPDU_START_INFO0_PKT_SEL_FP_CTRL_BAR BIT(10)
+#define RX_MPDU_START_INFO0_RXDMA0_SRC_RING_SEL GENMASK(13, 11)
+#define RX_MPDU_START_INFO0_RXDMA0_DST_RING_SEL GENMASK(16, 14)
+#define RX_MPDU_START_INFO0_MCAST_ECHO_DROP_EN BIT(17)
+#define RX_MPDU_START_INFO0_WDS_LEARN_DETECT_EN BIT(18)
+#define RX_MPDU_START_INFO0_INTRA_BSS_CHECK_EN BIT(19)
+#define RX_MPDU_START_INFO0_USE_PPE BIT(20)
+#define RX_MPDU_START_INFO0_PPE_ROUTING_EN BIT(21)
+
+#define RX_MPDU_START_INFO1_REO_QUEUE_DESC_HI GENMASK(7, 0)
+#define RX_MPDU_START_INFO1_RECV_QUEUE_NUM GENMASK(23, 8)
+#define RX_MPDU_START_INFO1_PRE_DELIM_ERR_WARN BIT(24)
+#define RX_MPDU_START_INFO1_FIRST_DELIM_ERR BIT(25)
+
+#define RX_MPDU_START_INFO2_EPD_EN BIT(0)
+#define RX_MPDU_START_INFO2_ALL_FRAME_ENCPD BIT(1)
+#define RX_MPDU_START_INFO2_ENC_TYPE GENMASK(5, 2)
+#define RX_MPDU_START_INFO2_VAR_WEP_KEY_WIDTH GENMASK(7, 6)
+#define RX_MPDU_START_INFO2_MESH_STA GENMASK(9, 8)
+#define RX_MPDU_START_INFO2_BSSID_HIT BIT(10)
+#define RX_MPDU_START_INFO2_BSSID_NUM GENMASK(14, 11)
+#define RX_MPDU_START_INFO2_TID GENMASK(18, 15)
+
+#define RX_MPDU_START_INFO3_RXPCU_MPDU_FLTR GENMASK(1, 0)
+#define RX_MPDU_START_INFO3_SW_FRAME_GRP_ID GENMASK(8, 2)
+#define RX_MPDU_START_INFO3_NDP_FRAME BIT(9)
+#define RX_MPDU_START_INFO3_PHY_ERR BIT(10)
+#define RX_MPDU_START_INFO3_PHY_ERR_MPDU_HDR BIT(11)
+#define RX_MPDU_START_INFO3_PROTO_VER_ERR BIT(12)
+#define RX_MPDU_START_INFO3_AST_LOOKUP_VALID BIT(13)
+#define RX_MPDU_START_INFO3_RANGING BIT(14)
+
+#define RX_MPDU_START_INFO4_MPDU_FCTRL_VALID BIT(0)
+#define RX_MPDU_START_INFO4_MPDU_DUR_VALID BIT(1)
+#define RX_MPDU_START_INFO4_MAC_ADDR1_VALID BIT(2)
+#define RX_MPDU_START_INFO4_MAC_ADDR2_VALID BIT(3)
+#define RX_MPDU_START_INFO4_MAC_ADDR3_VALID BIT(4)
+#define RX_MPDU_START_INFO4_MAC_ADDR4_VALID BIT(5)
+#define RX_MPDU_START_INFO4_MPDU_SEQ_CTRL_VALID BIT(6)
+#define RX_MPDU_START_INFO4_MPDU_QOS_CTRL_VALID BIT(7)
+#define RX_MPDU_START_INFO4_MPDU_HT_CTRL_VALID BIT(8)
+#define RX_MPDU_START_INFO4_ENCRYPT_INFO_VALID BIT(9)
+#define RX_MPDU_START_INFO4_MPDU_FRAG_NUMBER GENMASK(13, 10)
+#define RX_MPDU_START_INFO4_MORE_FRAG_FLAG BIT(14)
+#define RX_MPDU_START_INFO4_FROM_DS BIT(16)
+#define RX_MPDU_START_INFO4_TO_DS BIT(17)
+#define RX_MPDU_START_INFO4_ENCRYPTED BIT(18)
+#define RX_MPDU_START_INFO4_MPDU_RETRY BIT(19)
+#define RX_MPDU_START_INFO4_MPDU_SEQ_NUM GENMASK(31, 20)
+
+#define RX_MPDU_START_INFO5_KEY_ID GENMASK(7, 0)
+#define RX_MPDU_START_INFO5_NEW_PEER_ENTRY BIT(8)
+#define RX_MPDU_START_INFO5_DECRYPT_NEEDED BIT(9)
+#define RX_MPDU_START_INFO5_DECAP_TYPE GENMASK(11, 10)
+#define RX_MPDU_START_INFO5_VLAN_TAG_C_PADDING BIT(12)
+#define RX_MPDU_START_INFO5_VLAN_TAG_S_PADDING BIT(13)
+#define RX_MPDU_START_INFO5_STRIP_VLAN_TAG_C BIT(14)
+#define RX_MPDU_START_INFO5_STRIP_VLAN_TAG_S BIT(15)
+#define RX_MPDU_START_INFO5_PRE_DELIM_COUNT GENMASK(27, 16)
+#define RX_MPDU_START_INFO5_AMPDU_FLAG BIT(28)
+#define RX_MPDU_START_INFO5_BAR_FRAME BIT(29)
+#define RX_MPDU_START_INFO5_RAW_MPDU BIT(30)
+
+#define RX_MPDU_START_INFO6_MPDU_LEN GENMASK(13, 0)
+#define RX_MPDU_START_INFO6_FIRST_MPDU BIT(14)
+#define RX_MPDU_START_INFO6_MCAST_BCAST BIT(15)
+#define RX_MPDU_START_INFO6_AST_IDX_NOT_FOUND BIT(16)
+#define RX_MPDU_START_INFO6_AST_IDX_TIMEOUT BIT(17)
+#define RX_MPDU_START_INFO6_POWER_MGMT BIT(18)
+#define RX_MPDU_START_INFO6_NON_QOS BIT(19)
+#define RX_MPDU_START_INFO6_NULL_DATA BIT(20)
+#define RX_MPDU_START_INFO6_MGMT_TYPE BIT(21)
+#define RX_MPDU_START_INFO6_CTRL_TYPE BIT(22)
+#define RX_MPDU_START_INFO6_MORE_DATA BIT(23)
+#define RX_MPDU_START_INFO6_EOSP BIT(24)
+#define RX_MPDU_START_INFO6_FRAGMENT BIT(25)
+#define RX_MPDU_START_INFO6_ORDER BIT(26)
+#define RX_MPDU_START_INFO6_UAPSD_TRIGGER BIT(27)
+#define RX_MPDU_START_INFO6_ENCRYPT_REQUIRED BIT(28)
+#define RX_MPDU_START_INFO6_DIRECTED BIT(29)
+#define RX_MPDU_START_INFO6_AMSDU_PRESENT BIT(30)
+
+#define RX_MPDU_START_INFO7_VDEV_ID GENMASK(7, 0)
+#define RX_MPDU_START_INFO7_SERVICE_CODE GENMASK(16, 8)
+#define RX_MPDU_START_INFO7_PRIORITY_VALID BIT(17)
+#define RX_MPDU_START_INFO7_SRC_INFO GENMASK(29, 18)
+
+#define RX_MPDU_START_INFO8_AUTH_TO_SEND_WDS BIT(0)
+
+struct rx_mpdu_start_qcn9274 {
+ __le32 info0;
+ __le32 reo_queue_desc_lo;
+ __le32 info1;
+ __le32 pn[4];
+ __le32 info2;
+ __le32 peer_meta_data;
+ __le16 info3;
+ __le16 phy_ppdu_id;
+ __le16 ast_index;
+ __le16 sw_peer_id;
+ __le32 info4;
+ __le32 info5;
+ __le32 info6;
+ __le16 frame_ctrl;
+ __le16 duration;
+ u8 addr1[ETH_ALEN];
+ u8 addr2[ETH_ALEN];
+ u8 addr3[ETH_ALEN];
+ __le16 seq_ctrl;
+ u8 addr4[ETH_ALEN];
+ __le16 qos_ctrl;
+ __le32 ht_ctrl;
+ __le32 info7;
+ u8 multi_link_addr1[ETH_ALEN];
+ u8 multi_link_addr2[ETH_ALEN];
+ __le32 info8;
+ __le32 res0;
+ __le32 res1;
+} __packed;
+
+/* rx_mpdu_start
+ *
+ * reo_destination_indication
+ * The id of the reo exit ring where the msdu frame shall push
+ * after (MPDU level) reordering has finished. Values are defined
+ * in enum %HAL_RX_MSDU_DESC_REO_DEST_IND_.
+ *
+ * lmac_peer_id_msb
+ *
+ * If use_flow_id_toeplitz_clfy is set and lmac_peer_id_'sb
+ * is 2'b00, Rx OLE uses a REO destination indicati'n of {1'b1,
+ * hash[3:0]} using the chosen Toeplitz hash from Common Parser
+ * if flow search fails.
+ * If use_flow_id_toeplitz_clfy is set and lmac_peer_id_msb
+ * 's not 2'b00, Rx OLE uses a REO destination indication of
+ * {lmac_peer_id_msb, hash[2:0]} using the chosen Toeplitz
+ * hash from Common Parser if flow search fails.
+ *
+ * use_flow_id_toeplitz_clfy
+ * Indication to Rx OLE to enable REO destination routing based
+ * on the chosen Toeplitz hash from Common Parser, in case
+ * flow search fails
+ *
+ * pkt_selection_fp_ucast_data
+ * Filter pass Unicast data frame (matching rxpcu_filter_pass
+ * and sw_frame_group_Unicast_data) routing selection
+ *
+ * pkt_selection_fp_mcast_data
+ * Filter pass Multicast data frame (matching rxpcu_filter_pass
+ * and sw_frame_group_Multicast_data) routing selection
+ *
+ * pkt_selection_fp_ctrl_bar
+ * Filter pass BAR frame (matching rxpcu_filter_pass
+ * and sw_frame_group_ctrl_1000) routing selection
+ *
+ * rxdma0_src_ring_selection
+ * Field only valid when for the received frame type the corresponding
+ * pkt_selection_fp_... bit is set
+ *
+ * rxdma0_dst_ring_selection
+ * Field only valid when for the received frame type the corresponding
+ * pkt_selection_fp_... bit is set
+ *
+ * mcast_echo_drop_enable
+ * If set, for multicast packets, multicast echo check (i.e.
+ * SA search with mcast_echo_check = 1) shall be performed
+ * by RXOLE, and any multicast echo packets should be indicated
+ * to RXDMA for release to WBM
+ *
+ * wds_learning_detect_en
+ * If set, WDS learning detection based on SA search and notification
+ * to FW (using RXDMA0 status ring) is enabled and the "timestamp"
+ * field in address search failure cache-only entry should
+ * be used to avoid multiple WDS learning notifications.
+ *
+ * intrabss_check_en
+ * If set, intra-BSS routing detection is enabled
+ *
+ * use_ppe
+ * Indicates to RXDMA to ignore the REO_destination_indication
+ * and use a programmed value corresponding to the REO2PPE
+ * ring
+ * This override to REO2PPE for packets requiring multiple
+ * buffers shall be disabled based on an RXDMA configuration,
+ * as PPE may not support such packets.
+ *
+ * Supported only in full AP chips, not in client/soft
+ * chips
+ *
+ * ppe_routing_enable
+ * Global enable/disable bit for routing to PPE, used to disable
+ * PPE routing even if RXOLE CCE or flow search indicate 'Use_PPE'
+ * This is set by SW for peers which are being handled by a
+ * host SW/accelerator subsystem that also handles packet
+ * uffer management for WiFi-to-PPE routing.
+ *
+ * This is cleared by SW for peers which are being handled
+ * by a different subsystem, completely disabling WiFi-to-PPE
+ * routing for such peers.
+ *
+ * rx_reo_queue_desc_addr_lo
+ * Address (lower 32 bits) of the REO queue descriptor.
+ *
+ * rx_reo_queue_desc_addr_hi
+ * Address (upper 8 bits) of the REO queue descriptor.
+ *
+ * receive_queue_number
+ * Indicates the MPDU queue ID to which this MPDU link
+ * descriptor belongs.
+ *
+ * pre_delim_err_warning
+ * Indicates that a delimiter FCS error was found in between the
+ * previous MPDU and this MPDU. Note that this is just a warning,
+ * and does not mean that this MPDU is corrupted in any way. If
+ * it is, there will be other errors indicated such as FCS or
+ * decrypt errors.
+ *
+ * first_delim_err
+ * Indicates that the first delimiter had a FCS failure.
+ *
+ * pn
+ * The PN number.
+ *
+ * epd_en
+ * Field only valid when AST_based_lookup_valid == 1.
+ * In case of ndp or phy_err or AST_based_lookup_valid == 0,
+ * this field will be set to 0
+ * If set to one use EPD instead of LPD
+ * In case of ndp or phy_err, this field will never be set.
+ *
+ * all_frames_shall_be_encrypted
+ * In case of ndp or phy_err or AST_based_lookup_valid == 0,
+ * this field will be set to 0
+ *
+ * When set, all frames (data only ?) shall be encrypted. If
+ * not, RX CRYPTO shall set an error flag.
+ *
+ *
+ * encrypt_type
+ * In case of ndp or phy_err or AST_based_lookup_valid == 0,
+ * this field will be set to 0
+ *
+ * Indicates type of decrypt cipher used (as defined in the
+ * peer entry)
+ *
+ * wep_key_width_for_variable_key
+ *
+ * Field only valid when key_type is set to wep_varied_width.
+ *
+ * mesh_sta
+ *
+ * bssid_hit
+ * When set, the BSSID of the incoming frame matched one of
+ * the 8 BSSID register values
+ * bssid_number
+ * Field only valid when bssid_hit is set.
+ * This number indicates which one out of the 8 BSSID register
+ * values matched the incoming frame
+ *
+ * tid
+ * Field only valid when mpdu_qos_control_valid is set
+ * The TID field in the QoS control field
+ *
+ * peer_meta_data
+ * Meta data that SW has programmed in the Peer table entry
+ * of the transmitting STA.
+ *
+ * rxpcu_mpdu_filter_in_category
+ * Field indicates what the reason was that this mpdu frame
+ * was allowed to come into the receive path by rxpcu. Values
+ * are defined in enum %RX_DESC_RXPCU_FILTER_*.
+ *
+ * sw_frame_group_id
+ * SW processes frames based on certain classifications. Values
+ * are defined in enum %RX_DESC_SW_FRAME_GRP_ID_*.
+ *
+ * ndp_frame
+ * When set, the received frame was an NDP frame, and thus
+ * there will be no MPDU data.
+ * phy_err
+ * When set, a PHY error was received before MAC received any
+ * data, and thus there will be no MPDU data.
+ *
+ * phy_err_during_mpdu_header
+ * When set, a PHY error was received before MAC received the
+ * complete MPDU header which was needed for proper decoding
+ *
+ * protocol_version_err
+ * Set when RXPCU detected a version error in the Frame control
+ * field
+ *
+ * ast_based_lookup_valid
+ * When set, AST based lookup for this frame has found a valid
+ * result.
+ *
+ * ranging
+ * When set, a ranging NDPA or a ranging NDP was received.
+ *
+ * phy_ppdu_id
+ * A ppdu counter value that PHY increments for every PPDU
+ * received. The counter value wraps around.
+ *
+ * ast_index
+ *
+ * This field indicates the index of the AST entry corresponding
+ * to this MPDU. It is provided by the GSE module instantiated
+ * in RXPCU.
+ * A value of 0xFFFF indicates an invalid AST index, meaning
+ * that No AST entry was found or NO AST search was performed
+ *
+ * sw_peer_id
+ * In case of ndp or phy_err or AST_based_lookup_valid == 0,
+ * this field will be set to 0
+ * This field indicates a unique peer identifier. It is set
+ * equal to field 'sw_peer_id' from the AST entry
+ *
+ * frame_control_valid
+ * When set, the field Mpdu_Frame_control_field has valid information
+ *
+ * frame_duration_valid
+ * When set, the field Mpdu_duration_field has valid information
+ *
+ * mac_addr_ad1..4_valid
+ * When set, the fields mac_addr_adx_..... have valid information
+ *
+ * mpdu_seq_ctrl_valid
+ *
+ * When set, the fields mpdu_sequence_control_field and mpdu_sequence_number
+ * have valid information as well as field
+ * For MPDUs without a sequence control field, this field will
+ * not be set.
+ *
+ * mpdu_qos_ctrl_valid, mpdu_ht_ctrl_valid
+ *
+ * When set, the field mpdu_qos_control_field, mpdu_ht_control has valid
+ * information, For MPDUs without a QoS,HT control field, this field
+ * will not be set.
+ *
+ * frame_encryption_info_valid
+ *
+ * When set, the encryption related info fields, like IV and
+ * PN are valid
+ * For MPDUs that are not encrypted, this will not be set.
+ *
+ * mpdu_fragment_number
+ *
+ * Field only valid when Mpdu_sequence_control_valid is set
+ * AND Fragment_flag is set. The fragment number from the 802.11 header
+ *
+ * more_fragment_flag
+ *
+ * The More Fragment bit setting from the MPDU header of the
+ * received frame
+ *
+ * fr_ds
+ *
+ * Field only valid when Mpdu_frame_control_valid is set
+ * Set if the from DS bit is set in the frame control.
+ *
+ * to_ds
+ *
+ * Field only valid when Mpdu_frame_control_valid is set
+ * Set if the to DS bit is set in the frame control.
+ *
+ * encrypted
+ *
+ * Field only valid when Mpdu_frame_control_valid is set.
+ * Protected bit from the frame control.
+ *
+ * mpdu_retry
+ * Field only valid when Mpdu_frame_control_valid is set.
+ * Retry bit from the frame control. Only valid when first_msdu is set
+ *
+ * mpdu_sequence_number
+ * Field only valid when Mpdu_sequence_control_valid is set.
+ *
+ * The sequence number from the 802.11 header.
+ * key_id
+ * The key ID octet from the IV.
+ * Field only valid when Frame_encryption_info_valid is set
+ *
+ * new_peer_entry
+ * Set if new RX_PEER_ENTRY TLV follows. If clear, RX_PEER_ENTRY
+ * doesn't follow so RX DECRYPTION module either uses old peer
+ * entry or not decrypt.
+ *
+ * decrypt_needed
+ * When RXPCU sets bit 'ast_index_not_found or ast_index_timeout',
+ * RXPCU will also ensure that this bit is NOT set. CRYPTO for that
+ * reason only needs to evaluate this bit and non of the other ones
+ *
+ * decap_type
+ * Used by the OLE during decapsulation. Values are defined in
+ * enum %MPDU_START_DECAP_TYPE_*.
+ *
+ * rx_insert_vlan_c_tag_padding
+ * rx_insert_vlan_s_tag_padding
+ * Insert 4 byte of all zeros as VLAN tag or double VLAN tag if
+ * the rx payload does not have VLAN.
+ *
+ * strip_vlan_c_tag_decap
+ * strip_vlan_s_tag_decap
+ * Strip VLAN or double VLAN during decapsulation.
+ *
+ * pre_delim_count
+ * The number of delimiters before this MPDU. Note that this
+ * number is cleared at PPDU start. If this MPDU is the first
+ * received MPDU in the PPDU and this MPDU gets filtered-in,
+ * this field will indicate the number of delimiters located
+ * after the last MPDU in the previous PPDU.
+ *
+ * If this MPDU is located after the first received MPDU in
+ * an PPDU, this field will indicate the number of delimiters
+ * located between the previous MPDU and this MPDU.
+ *
+ * ampdu_flag
+ * Received frame was part of an A-MPDU.
+ *
+ * bar_frame
+ * Received frame is a BAR frame
+ *
+ * raw_mpdu
+ * Set when no 802.11 to nwifi/ethernet hdr conversion is done
+ *
+ * mpdu_length
+ * MPDU length before decapsulation.
+ *
+ * first_mpdu
+ * Indicates the first MSDU of the PPDU. If both first_mpdu
+ * and last_mpdu are set in the MSDU then this is a not an
+ * A-MPDU frame but a stand alone MPDU. Interior MPDU in an
+ * A-MPDU shall have both first_mpdu and last_mpdu bits set to
+ * 0. The PPDU start status will only be valid when this bit
+ * is set.
+ *
+ * mcast_bcast
+ * Multicast / broadcast indicator. Only set when the MAC
+ * address 1 bit 0 is set indicating mcast/bcast and the BSSID
+ * matches one of the 4 BSSID registers. Only set when
+ * first_msdu is set.
+ *
+ * ast_index_not_found
+ * Only valid when first_msdu is set. Indicates no AST matching
+ * entries within the max search count.
+ *
+ * ast_index_timeout
+ * Only valid when first_msdu is set. Indicates an unsuccessful
+ * search in the address search table due to timeout.
+ *
+ * power_mgmt
+ * Power management bit set in the 802.11 header. Only set
+ * when first_msdu is set.
+ *
+ * non_qos
+ * Set if packet is not a non-QoS data frame. Only set when
+ * first_msdu is set.
+ *
+ * null_data
+ * Set if frame type indicates either null data or QoS null
+ * data format. Only set when first_msdu is set.
+ *
+ * mgmt_type
+ * Set if packet is a management packet. Only set when
+ * first_msdu is set.
+ *
+ * ctrl_type
+ * Set if packet is a control packet. Only set when first_msdu
+ * is set.
+ *
+ * more_data
+ * Set if more bit in frame control is set. Only set when
+ * first_msdu is set.
+ *
+ * eosp
+ * Set if the EOSP (end of service period) bit in the QoS
+ * control field is set. Only set when first_msdu is set.
+ *
+ *
+ * fragment_flag
+ * Fragment indication
+ *
+ * order
+ * Set if the order bit in the frame control is set. Only
+ * set when first_msdu is set.
+ *
+ * u_apsd_trigger
+ * U-APSD trigger frame
+ *
+ * encrypt_required
+ * Indicates that this data type frame is not encrypted even if
+ * the policy for this MPDU requires encryption as indicated in
+ * the peer table key type.
+ *
+ * directed
+ * MPDU is a directed packet which means that the RA matched
+ * our STA addresses. In proxySTA it means that the TA matched
+ * an entry in our address search table with the corresponding
+ * 'no_ack' bit is the address search entry cleared.
+ * amsdu_present
+ * AMSDU present
+ *
+ * mpdu_frame_control_field
+ * Frame control field in header. Only valid when the field is marked valid.
+ *
+ * mpdu_duration_field
+ * Duration field in header. Only valid when the field is marked valid.
+ *
+ * mac_addr_adx
+ * MAC addresses in the received frame. Only valid when corresponding
+ * address valid bit is set
+ *
+ * mpdu_qos_control_field, mpdu_ht_control_field
+ * QoS/HT control fields from header. Valid only when corresponding fields
+ * are marked valid
+ *
+ * vdev_id
+ * Virtual device associated with this peer
+ * RXOLE uses this to determine intra-BSS routing.
+ *
+ * service_code
+ * Opaque service code between PPE and Wi-Fi
+ * This field gets passed on by REO to PPE in the EDMA descriptor
+ * ('REO_TO_PPE_RING').
+ *
+ * priority_valid
+ * This field gets passed on by REO to PPE in the EDMA descriptor
+ * ('REO_TO_PPE_RING').
+ *
+ * src_info
+ * Source (virtual) device/interface info. associated with
+ * this peer
+ * This field gets passed on by REO to PPE in the EDMA descriptor
+ * ('REO_TO_PPE_RING').
+ *
+ * multi_link_addr_ad1_ad2_valid
+ * If set, Rx OLE shall convert Address1 and Address2 of received
+ * data frames to multi-link addresses during decapsulation to eth/nwifi
+ *
+ * multi_link_addr_ad1,ad2
+ * Multi-link receiver address1,2. Only valid when corresponding
+ * valid bit is set
+ *
+ * authorize_to_send_wds
+ * If not set, RXDMA shall perform error-routing for WDS packets
+ * as the sender is not authorized and might misuse WDS frame
+ * format to inject packets with arbitrary DA/SA.
+ *
+ */
+
+enum rx_msdu_start_pkt_type {
+ RX_MSDU_START_PKT_TYPE_11A,
+ RX_MSDU_START_PKT_TYPE_11B,
+ RX_MSDU_START_PKT_TYPE_11N,
+ RX_MSDU_START_PKT_TYPE_11AC,
+ RX_MSDU_START_PKT_TYPE_11AX,
+};
+
+enum rx_msdu_start_sgi {
+ RX_MSDU_START_SGI_0_8_US,
+ RX_MSDU_START_SGI_0_4_US,
+ RX_MSDU_START_SGI_1_6_US,
+ RX_MSDU_START_SGI_3_2_US,
+};
+
+enum rx_msdu_start_recv_bw {
+ RX_MSDU_START_RECV_BW_20MHZ,
+ RX_MSDU_START_RECV_BW_40MHZ,
+ RX_MSDU_START_RECV_BW_80MHZ,
+ RX_MSDU_START_RECV_BW_160MHZ,
+};
+
+enum rx_msdu_start_reception_type {
+ RX_MSDU_START_RECEPTION_TYPE_SU,
+ RX_MSDU_START_RECEPTION_TYPE_DL_MU_MIMO,
+ RX_MSDU_START_RECEPTION_TYPE_DL_MU_OFDMA,
+ RX_MSDU_START_RECEPTION_TYPE_DL_MU_OFDMA_MIMO,
+ RX_MSDU_START_RECEPTION_TYPE_UL_MU_MIMO,
+ RX_MSDU_START_RECEPTION_TYPE_UL_MU_OFDMA,
+ RX_MSDU_START_RECEPTION_TYPE_UL_MU_OFDMA_MIMO,
+};
+
+#define RX_MSDU_END_INFO0_RXPCU_MPDU_FITLER GENMASK(1, 0)
+#define RX_MSDU_END_INFO0_SW_FRAME_GRP_ID GENMASK(8, 2)
+
+#define RX_MSDU_END_INFO1_REPORTED_MPDU_LENGTH GENMASK(13, 0)
+
+#define RX_MSDU_END_INFO2_CCE_SUPER_RULE GENMASK(13, 8)
+#define RX_MSDU_END_INFO2_CCND_TRUNCATE BIT(14)
+#define RX_MSDU_END_INFO2_CCND_CCE_DIS BIT(15)
+
+#define RX_MSDU_END_INFO3_DA_OFFSET GENMASK(5, 0)
+#define RX_MSDU_END_INFO3_SA_OFFSET GENMASK(11, 6)
+#define RX_MSDU_END_INFO3_DA_OFFSET_VALID BIT(12)
+#define RX_MSDU_END_INFO3_SA_OFFSET_VALID BIT(13)
+
+#define RX_MSDU_END_INFO4_TCP_FLAG GENMASK(8, 0)
+#define RX_MSDU_END_INFO4_LRO_ELIGIBLE BIT(9)
+
+#define RX_MSDU_END_INFO5_SA_IDX_TIMEOUT BIT(0)
+#define RX_MSDU_END_INFO5_DA_IDX_TIMEOUT BIT(1)
+#define RX_MSDU_END_INFO5_TO_DS BIT(2)
+#define RX_MSDU_END_INFO5_TID GENMASK(6, 3)
+#define RX_MSDU_END_INFO5_SA_IS_VALID BIT(7)
+#define RX_MSDU_END_INFO5_DA_IS_VALID BIT(8)
+#define RX_MSDU_END_INFO5_DA_IS_MCBC BIT(9)
+#define RX_MSDU_END_INFO5_L3_HDR_PADDING GENMASK(11, 10)
+#define RX_MSDU_END_INFO5_FIRST_MSDU BIT(12)
+#define RX_MSDU_END_INFO5_LAST_MSDU BIT(13)
+#define RX_MSDU_END_INFO5_FROM_DS BIT(14)
+#define RX_MSDU_END_INFO5_IP_CHKSUM_FAIL_COPY BIT(15)
+
+#define RX_MSDU_END_INFO6_MSDU_DROP BIT(0)
+#define RX_MSDU_END_INFO6_REO_DEST_IND GENMASK(5, 1)
+#define RX_MSDU_END_INFO6_FLOW_IDX GENMASK(25, 6)
+#define RX_MSDU_END_INFO6_USE_PPE BIT(26)
+#define RX_MSDU_END_INFO6_MESH_STA GENMASK(28, 27)
+#define RX_MSDU_END_INFO6_VLAN_CTAG_STRIPPED BIT(29)
+#define RX_MSDU_END_INFO6_VLAN_STAG_STRIPPED BIT(30)
+#define RX_MSDU_END_INFO6_FRAGMENT_FLAG BIT(31)
+
+#define RX_MSDU_END_INFO7_AGGR_COUNT GENMASK(7, 0)
+#define RX_MSDU_END_INFO7_FLOW_AGGR_CONTN BIT(8)
+#define RX_MSDU_END_INFO7_FISA_TIMEOUT BIT(9)
+#define RX_MSDU_END_INFO7_TCPUDP_CSUM_FAIL_CPY BIT(10)
+#define RX_MSDU_END_INFO7_MSDU_LIMIT_ERROR BIT(11)
+#define RX_MSDU_END_INFO7_FLOW_IDX_TIMEOUT BIT(12)
+#define RX_MSDU_END_INFO7_FLOW_IDX_INVALID BIT(13)
+#define RX_MSDU_END_INFO7_CCE_MATCH BIT(14)
+#define RX_MSDU_END_INFO7_AMSDU_PARSER_ERR BIT(15)
+
+#define RX_MSDU_END_INFO8_KEY_ID GENMASK(7, 0)
+
+#define RX_MSDU_END_INFO9_SERVICE_CODE GENMASK(14, 6)
+#define RX_MSDU_END_INFO9_PRIORITY_VALID BIT(15)
+#define RX_MSDU_END_INFO9_INRA_BSS BIT(16)
+#define RX_MSDU_END_INFO9_DEST_CHIP_ID GENMASK(18, 17)
+#define RX_MSDU_END_INFO9_MCAST_ECHO BIT(19)
+#define RX_MSDU_END_INFO9_WDS_LEARN_EVENT BIT(20)
+#define RX_MSDU_END_INFO9_WDS_ROAM_EVENT BIT(21)
+#define RX_MSDU_END_INFO9_WDS_KEEP_ALIVE_EVENT BIT(22)
+
+#define RX_MSDU_END_INFO10_MSDU_LENGTH GENMASK(13, 0)
+#define RX_MSDU_END_INFO10_STBC BIT(14)
+#define RX_MSDU_END_INFO10_IPSEC_ESP BIT(15)
+#define RX_MSDU_END_INFO10_L3_OFFSET GENMASK(22, 16)
+#define RX_MSDU_END_INFO10_IPSEC_AH BIT(23)
+#define RX_MSDU_END_INFO10_L4_OFFSET GENMASK(31, 24)
+
+#define RX_MSDU_END_INFO11_MSDU_NUMBER GENMASK(7, 0)
+#define RX_MSDU_END_INFO11_DECAP_FORMAT GENMASK(9, 8)
+#define RX_MSDU_END_INFO11_IPV4 BIT(10)
+#define RX_MSDU_END_INFO11_IPV6 BIT(11)
+#define RX_MSDU_END_INFO11_TCP BIT(12)
+#define RX_MSDU_END_INFO11_UDP BIT(13)
+#define RX_MSDU_END_INFO11_IP_FRAG BIT(14)
+#define RX_MSDU_END_INFO11_TCP_ONLY_ACK BIT(15)
+#define RX_MSDU_END_INFO11_DA_IS_BCAST_MCAST BIT(16)
+#define RX_MSDU_END_INFO11_SEL_TOEPLITZ_HASH GENMASK(18, 17)
+#define RX_MSDU_END_INFO11_IP_FIXED_HDR_VALID BIT(19)
+#define RX_MSDU_END_INFO11_IP_EXTN_HDR_VALID BIT(20)
+#define RX_MSDU_END_INFO11_IP_TCP_UDP_HDR_VALID BIT(21)
+#define RX_MSDU_END_INFO11_MESH_CTRL_PRESENT BIT(22)
+#define RX_MSDU_END_INFO11_LDPC BIT(23)
+#define RX_MSDU_END_INFO11_IP4_IP6_NXT_HDR GENMASK(31, 24)
+
+#define RX_MSDU_END_INFO12_USER_RSSI GENMASK(7, 0)
+#define RX_MSDU_END_INFO12_PKT_TYPE GENMASK(11, 8)
+#define RX_MSDU_END_INFO12_SGI GENMASK(13, 12)
+#define RX_MSDU_END_INFO12_RATE_MCS GENMASK(17, 14)
+#define RX_MSDU_END_INFO12_RECV_BW GENMASK(20, 18)
+#define RX_MSDU_END_INFO12_RECEPTION_TYPE GENMASK(23, 21)
+#define RX_MSDU_END_INFO12_MIMO_SS_BITMAP GENMASK(30, 24)
+#define RX_MSDU_END_INFO12_MIMO_DONE_COPY BIT(31)
+
+#define RX_MSDU_END_INFO13_FIRST_MPDU BIT(0)
+#define RX_MSDU_END_INFO13_MCAST_BCAST BIT(2)
+#define RX_MSDU_END_INFO13_AST_IDX_NOT_FOUND BIT(3)
+#define RX_MSDU_END_INFO13_AST_IDX_TIMEDOUT BIT(4)
+#define RX_MSDU_END_INFO13_POWER_MGMT BIT(5)
+#define RX_MSDU_END_INFO13_NON_QOS BIT(6)
+#define RX_MSDU_END_INFO13_NULL_DATA BIT(7)
+#define RX_MSDU_END_INFO13_MGMT_TYPE BIT(8)
+#define RX_MSDU_END_INFO13_CTRL_TYPE BIT(9)
+#define RX_MSDU_END_INFO13_MORE_DATA BIT(10)
+#define RX_MSDU_END_INFO13_EOSP BIT(11)
+#define RX_MSDU_END_INFO13_A_MSDU_ERROR BIT(12)
+#define RX_MSDU_END_INFO13_ORDER BIT(14)
+#define RX_MSDU_END_INFO13_WIFI_PARSER_ERR BIT(15)
+#define RX_MSDU_END_INFO13_OVERFLOW_ERR BIT(16)
+#define RX_MSDU_END_INFO13_MSDU_LEN_ERR BIT(17)
+#define RX_MSDU_END_INFO13_TCP_UDP_CKSUM_FAIL BIT(18)
+#define RX_MSDU_END_INFO13_IP_CKSUM_FAIL BIT(19)
+#define RX_MSDU_END_INFO13_SA_IDX_INVALID BIT(20)
+#define RX_MSDU_END_INFO13_DA_IDX_INVALID BIT(21)
+#define RX_MSDU_END_INFO13_AMSDU_ADDR_MISMATCH BIT(22)
+#define RX_MSDU_END_INFO13_RX_IN_TX_DECRYPT_BYP BIT(23)
+#define RX_MSDU_END_INFO13_ENCRYPT_REQUIRED BIT(24)
+#define RX_MSDU_END_INFO13_DIRECTED BIT(25)
+#define RX_MSDU_END_INFO13_BUFFER_FRAGMENT BIT(26)
+#define RX_MSDU_END_INFO13_MPDU_LEN_ERR BIT(27)
+#define RX_MSDU_END_INFO13_TKIP_MIC_ERR BIT(28)
+#define RX_MSDU_END_INFO13_DECRYPT_ERR BIT(29)
+#define RX_MSDU_END_INFO13_UNDECRYPT_FRAME_ERR BIT(30)
+#define RX_MSDU_END_INFO13_FCS_ERR BIT(31)
+
+#define RX_MSDU_END_INFO14_DECRYPT_STATUS_CODE GENMASK(12, 10)
+#define RX_MSDU_END_INFO14_RX_BITMAP_NOT_UPDED BIT(13)
+#define RX_MSDU_END_INFO14_MSDU_DONE BIT(31)
+
+struct rx_msdu_end_qcn9274 {
+ __le16 info0;
+ __le16 phy_ppdu_id;
+ __le16 ip_hdr_cksum;
+ __le16 info1;
+ __le16 info2;
+ __le16 cumulative_l3_checksum;
+ __le32 rule_indication0;
+ __le32 ipv6_options_crc;
+ __le16 info3;
+ __le16 l3_type;
+ __le32 rule_indication1;
+ __le32 tcp_seq_num;
+ __le32 tcp_ack_num;
+ __le16 info4;
+ __le16 window_size;
+ __le16 sa_sw_peer_id;
+ __le16 info5;
+ __le16 sa_idx;
+ __le16 da_idx_or_sw_peer_id;
+ __le32 info6;
+ __le32 fse_metadata;
+ __le16 cce_metadata;
+ __le16 tcp_udp_cksum;
+ __le16 info7;
+ __le16 cumulative_ip_length;
+ __le32 info8;
+ __le32 info9;
+ __le32 info10;
+ __le32 info11;
+ __le16 vlan_ctag_ci;
+ __le16 vlan_stag_ci;
+ __le32 peer_meta_data;
+ __le32 info12;
+ __le32 flow_id_toeplitz;
+ __le32 ppdu_start_timestamp_63_32;
+ __le32 phy_meta_data;
+ __le32 ppdu_start_timestamp_31_0;
+ __le32 toeplitz_hash_2_or_4;
+ __le16 res0;
+ __le16 sa_15_0;
+ __le32 sa_47_16;
+ __le32 info13;
+ __le32 info14;
+} __packed;
+
+/* rx_msdu_end
+ *
+ * rxpcu_mpdu_filter_in_category
+ * Field indicates what the reason was that this mpdu frame
+ * was allowed to come into the receive path by rxpcu. Values
+ * are defined in enum %RX_DESC_RXPCU_FILTER_*.
+ *
+ * sw_frame_group_id
+ * SW processes frames based on certain classifications. Values
+ * are defined in enum %RX_DESC_SW_FRAME_GRP_ID_*.
+ *
+ * phy_ppdu_id
+ * A ppdu counter value that PHY increments for every PPDU
+ * received. The counter value wraps around.
+ *
+ * ip_hdr_cksum
+ * This can include the IP header checksum or the pseudo
+ * header checksum used by TCP/UDP checksum.
+ *
+ * reported_mpdu_length
+ * MPDU length before decapsulation. Only valid when first_msdu is
+ * set. This field is taken directly from the length field of the
+ * A-MPDU delimiter or the preamble length field for non-A-MPDU
+ * frames.
+ *
+ * cce_super_rule
+ * Indicates the super filter rule.
+ *
+ * cce_classify_not_done_truncate
+ * Classification failed due to truncated frame.
+ *
+ * cce_classify_not_done_cce_dis
+ * Classification failed due to CCE global disable
+ *
+ * cumulative_l3_checksum
+ * FISA: IP header checksum including the total MSDU length
+ * that is part of this flow aggregated so far, reported if
+ * 'RXOLE_R0_FISA_CTRL. CHKSUM_CUM_IP_LEN_EN' is set
+ *
+ * rule_indication
+ * Bitmap indicating which of rules have matched.
+ *
+ * ipv6_options_crc
+ * 32 bit CRC computed out of IP v6 extension headers.
+ *
+ * da_offset
+ * Offset into MSDU buffer for DA.
+ *
+ * sa_offset
+ * Offset into MSDU buffer for SA.
+ *
+ * da_offset_valid
+ * da_offset field is valid. This will be set to 0 in case
+ * of a dynamic A-MSDU when DA is compressed.
+ *
+ * sa_offset_valid
+ * sa_offset field is valid. This will be set to 0 in case
+ * of a dynamic A-MSDU when SA is compressed.
+ *
+ * l3_type
+ * The 16-bit type value indicating the type of L3 later
+ * extracted from LLC/SNAP, set to zero if SNAP is not
+ * available.
+ *
+ * tcp_seq_number
+ * TCP sequence number.
+ *
+ * tcp_ack_number
+ * TCP acknowledge number.
+ *
+ * tcp_flag
+ * TCP flags {NS, CWR, ECE, URG, ACK, PSH, RST, SYN, FIN}.
+ *
+ * lro_eligible
+ * Computed out of TCP and IP fields to indicate that this
+ * MSDU is eligible for LRO.
+ *
+ * window_size
+ * TCP receive window size.
+ *
+ * sa_sw_peer_id
+ * sw_peer_id from the address search entry corresponding to the
+ * source address of the MSDU.
+ *
+ * sa_idx_timeout
+ * Indicates an unsuccessful MAC source address search due to the
+ * expiring of the search timer.
+ *
+ * da_idx_timeout
+ * Indicates an unsuccessful MAC destination address search due to
+ * the expiring of the search timer.
+ *
+ * to_ds
+ * Set if the to DS bit is set in the frame control.
+ *
+ * tid
+ * TID field in the QoS control field
+ *
+ * sa_is_valid
+ * Indicates that OLE found a valid SA entry.
+ *
+ * da_is_valid
+ * Indicates that OLE found a valid DA entry.
+ *
+ * da_is_mcbc
+ * Field Only valid if da_is_valid is set. Indicates the DA address
+ * was a Multicast of Broadcast address.
+ *
+ * l3_header_padding
+ * Number of bytes padded to make sure that the L3 header will
+ * always start of a Dword boundary.
+ *
+ * first_msdu
+ * Indicates the first MSDU of A-MSDU. If both first_msdu and
+ * last_msdu are set in the MSDU then this is a non-aggregated MSDU
+ * frame: normal MPDU. Interior MSDU in an A-MSDU shall have both
+ * first_mpdu and last_mpdu bits set to 0.
+ *
+ * last_msdu
+ * Indicates the last MSDU of the A-MSDU. MPDU end status is only
+ * valid when last_msdu is set.
+ *
+ * fr_ds
+ * Set if the from DS bit is set in the frame control.
+ *
+ * ip_chksum_fail_copy
+ * Indicates that the computed checksum did not match the
+ * checksum in the IP header.
+ *
+ * sa_idx
+ * The offset in the address table which matches the MAC source
+ * address.
+ *
+ * da_idx_or_sw_peer_id
+ * Based on a register configuration in RXOLE, this field will
+ * contain:
+ * The offset in the address table which matches the MAC destination
+ * address
+ * OR:
+ * sw_peer_id from the address search entry corresponding to
+ * the destination address of the MSDU
+ *
+ * msdu_drop
+ * REO shall drop this MSDU and not forward it to any other ring.
+ *
+ * The id of the reo exit ring where the msdu frame shall push
+ * after (MPDU level) reordering has finished. Values are defined
+ * in enum %HAL_RX_MSDU_DESC_REO_DEST_IND_.
+ *
+ * flow_idx
+ * Flow table index.
+ *
+ * use_ppe
+ * Indicates to RXDMA to ignore the REO_destination_indication
+ * and use a programmed value corresponding to the REO2PPE
+ * ring
+ *
+ * mesh_sta
+ * When set, this is a Mesh (11s) STA.
+ *
+ * vlan_ctag_stripped
+ * Set by RXOLE if it stripped 4-bytes of C-VLAN Tag from the
+ * packet
+ *
+ * vlan_stag_stripped
+ * Set by RXOLE if it stripped 4-bytes of S-VLAN Tag from the
+ * packet
+ *
+ * fragment_flag
+ * Indicates that this is an 802.11 fragment frame. This is
+ * set when either the more_frag bit is set in the frame control
+ * or the fragment number is not zero. Only set when first_msdu
+ * is set.
+ *
+ * fse_metadata
+ * FSE related meta data.
+ *
+ * cce_metadata
+ * CCE related meta data.
+ *
+ * tcp_udp_chksum
+ * The value of the computed TCP/UDP checksum. A mode bit
+ * selects whether this checksum is the full checksum or the
+ * partial checksum which does not include the pseudo header.
+ *
+ * aggregation_count
+ * Number of MSDU's aggregated so far
+ *
+ * flow_aggregation_continuation
+ * To indicate that this MSDU can be aggregated with
+ * the previous packet with the same flow id
+ *
+ * fisa_timeout
+ * To indicate that the aggregation has restarted for
+ * this flow due to timeout
+ *
+ * tcp_udp_chksum_fail
+ * Indicates that the computed checksum (tcp_udp_chksum) did
+ * not match the checksum in the TCP/UDP header.
+ *
+ * msdu_limit_error
+ * Indicates that the MSDU threshold was exceeded and thus all the
+ * rest of the MSDUs will not be scattered and will not be
+ * decapsulated but will be DMA'ed in RAW format as a single MSDU.
+ *
+ * flow_idx_timeout
+ * Indicates an unsuccessful flow search due to the expiring of
+ * the search timer.
+ *
+ * flow_idx_invalid
+ * flow id is not valid.
+ *
+ * cce_match
+ * Indicates that this status has a corresponding MSDU that
+ * requires FW processing. The OLE will have classification
+ * ring mask registers which will indicate the ring(s) for
+ * packets and descriptors which need FW attention.
+ *
+ * amsdu_parser_error
+ * A-MSDU could not be properly de-agregated.
+ *
+ * cumulative_ip_length
+ * Total MSDU length that is part of this flow aggregated
+ * so far
+ *
+ * key_id
+ * The key ID octet from the IV. Only valid when first_msdu is set.
+ *
+ * service_code
+ * Opaque service code between PPE and Wi-Fi
+ *
+ * priority_valid
+ * This field gets passed on by REO to PPE in the EDMA descriptor
+ *
+ * intra_bss
+ * This packet needs intra-BSS routing by SW as the 'vdev_id'
+ * for the destination is the same as 'vdev_id' (from 'RX_MPDU_PCU_START')
+ * that this MSDU was got in.
+ *
+ * dest_chip_id
+ * If intra_bss is set, copied by RXOLE from 'ADDR_SEARCH_ENTRY'
+ * to support intra-BSS routing with multi-chip multi-link
+ * operation. This indicates into which chip's TCL the packet should be
+ * queueued
+ *
+ * multicast_echo
+ * If set, this packet is a multicast echo, i.e. the DA is
+ * multicast and Rx OLE SA search with mcast_echo_check = 1
+ * passed. RXDMA should release such packets to WBM.
+ *
+ * wds_learning_event
+ * If set, this packet has an SA search failure with WDS learning
+ * enabled for the peer. RXOLE should route this TLV to the
+ * RXDMA0 status ring to notify FW.
+ *
+ * wds_roaming_event
+ * If set, this packet's SA 'Sw_peer_id' mismatches the 'Sw_peer_id'
+ * of the peer through which the packet was got, indicating
+ * the SA node has roamed. RXOLE should route this TLV to
+ * the RXDMA0 status ring to notify FW.
+ *
+ * wds_keep_alive_event
+ * If set, the AST timestamp for this packet's SA is older
+ * than the current timestamp by more than a threshold programmed
+ * in RXOLE. RXOLE should route this TLV to the RXDMA0 status
+ * ring to notify FW to keep the AST entry for the SA alive.
+ *
+ * msdu_length
+ * MSDU length in bytes after decapsulation.
+ * This field is still valid for MPDU frames without A-MSDU.
+ * It still represents MSDU length after decapsulation
+ *
+ * stbc
+ * When set, use STBC transmission rates.
+ *
+ * ipsec_esp
+ * Set if IPv4/v6 packet is using IPsec ESP.
+ *
+ * l3_offset
+ * Depending upon mode bit, this field either indicates the
+ * L3 offset in bytes from the start of the RX_HEADER or the IP
+ * offset in bytes from the start of the packet after
+ * decapsulation. The latter is only valid if ipv4_proto or
+ * ipv6_proto is set.
+ *
+ * ipsec_ah
+ * Set if IPv4/v6 packet is using IPsec AH
+ *
+ * l4_offset
+ * Depending upon mode bit, this field either indicates the
+ * L4 offset nin bytes from the start of RX_HEADER (only valid
+ * if either ipv4_proto or ipv6_proto is set to 1) or indicates
+ * the offset in bytes to the start of TCP or UDP header from
+ * the start of the IP header after decapsulation (Only valid if
+ * tcp_proto or udp_proto is set). The value 0 indicates that
+ * the offset is longer than 127 bytes.
+ *
+ * msdu_number
+ * Indicates the MSDU number within a MPDU. This value is
+ * reset to zero at the start of each MPDU. If the number of
+ * MSDU exceeds 255 this number will wrap using modulo 256.
+ *
+ * decap_type
+ * Indicates the format after decapsulation. Values are defined in
+ * enum %MPDU_START_DECAP_TYPE_*.
+ *
+ * ipv4_proto
+ * Set if L2 layer indicates IPv4 protocol.
+ *
+ * ipv6_proto
+ * Set if L2 layer indicates IPv6 protocol.
+ *
+ * tcp_proto
+ * Set if the ipv4_proto or ipv6_proto are set and the IP protocol
+ * indicates TCP.
+ *
+ * udp_proto
+ * Set if the ipv4_proto or ipv6_proto are set and the IP protocol
+ * indicates UDP.
+ *
+ * ip_frag
+ * Indicates that either the IP More frag bit is set or IP frag
+ * number is non-zero. If set indicates that this is a fragmented
+ * IP packet.
+ *
+ * tcp_only_ack
+ * Set if only the TCP Ack bit is set in the TCP flags and if
+ * the TCP payload is 0.
+ *
+ * da_is_bcast_mcast
+ * The destination address is broadcast or multicast.
+ *
+ * toeplitz_hash
+ * Actual chosen Hash.
+ * 0 - Toeplitz hash of 2-tuple (IP source address, IP
+ * destination address)
+ * 1 - Toeplitz hash of 4-tuple (IP source address,
+ * IP destination address, L4 (TCP/UDP) source port,
+ * L4 (TCP/UDP) destination port)
+ * 2 - Toeplitz of flow_id
+ * 3 - Zero is used
+ *
+ * ip_fixed_header_valid
+ * Fixed 20-byte IPv4 header or 40-byte IPv6 header parsed
+ * fully within first 256 bytes of the packet
+ *
+ * ip_extn_header_valid
+ * IPv6/IPv6 header, including IPv4 options and
+ * recognizable extension headers parsed fully within first 256
+ * bytes of the packet
+ *
+ * tcp_udp_header_valid
+ * Fixed 20-byte TCP (excluding TCP options) or 8-byte UDP
+ * header parsed fully within first 256 bytes of the packet
+ *
+ * mesh_control_present
+ * When set, this MSDU includes the 'Mesh Control' field
+ *
+ * ldpc
+ *
+ * ip4_protocol_ip6_next_header
+ * For IPv4, this is the 8 bit protocol field set). For IPv6 this
+ * is the 8 bit next_header field.
+ *
+ *
+ * vlan_ctag_ci
+ * 2 bytes of C-VLAN Tag Control Information from WHO_L2_LLC
+ *
+ * vlan_stag_ci
+ * 2 bytes of S-VLAN Tag Control Information from WHO_L2_LLC
+ * in case of double VLAN
+ *
+ * peer_meta_data
+ * Meta data that SW has programmed in the Peer table entry
+ * of the transmitting STA.
+ *
+ * user_rssi
+ * RSSI for this user
+ *
+ * pkt_type
+ * Values are defined in enum %RX_MSDU_START_PKT_TYPE_*.
+ *
+ * sgi
+ * Field only valid when pkt type is HT, VHT or HE. Values are
+ * defined in enum %RX_MSDU_START_SGI_*.
+ *
+ * rate_mcs
+ * MCS Rate used.
+ *
+ * receive_bandwidth
+ * Full receive Bandwidth. Values are defined in enum
+ * %RX_MSDU_START_RECV_*.
+ *
+ * reception_type
+ * Indicates what type of reception this is and defined in enum
+ * %RX_MSDU_START_RECEPTION_TYPE_*.
+ *
+ * mimo_ss_bitmap
+ * Field only valid when
+ * Reception_type is RX_MSDU_START_RECEPTION_TYPE_DL_MU_MIMO or
+ * RX_MSDU_START_RECEPTION_TYPE_DL_MU_OFDMA_MIMO.
+ *
+ * Bitmap, with each bit indicating if the related spatial
+ * stream is used for this STA
+ *
+ * LSB related to SS 0
+ *
+ * 0 - spatial stream not used for this reception
+ * 1 - spatial stream used for this reception
+ *
+ * msdu_done_copy
+ * If set indicates that the RX packet data, RX header data,
+ * RX PPDU start descriptor, RX MPDU start/end descriptor,
+ * RX MSDU start/end descriptors and RX Attention descriptor
+ * are all valid. This bit is in the last 64-bit of the descriptor
+ * expected to be subscribed in future hardware.
+ *
+ * flow_id_toeplitz
+ * Toeplitz hash of 5-tuple
+ * {IP source address, IP destination address, IP source port, IP
+ * destination port, L4 protocol} in case of non-IPSec.
+ *
+ * In case of IPSec - Toeplitz hash of 4-tuple
+ * {IP source address, IP destination address, SPI, L4 protocol}
+ *
+ * The relevant Toeplitz key registers are provided in RxOLE's
+ * instance of common parser module. These registers are separate
+ * from the Toeplitz keys used by ASE/FSE modules inside RxOLE.
+ * The actual value will be passed on from common parser module
+ * to RxOLE in one of the WHO_* TLVs.
+ *
+ * ppdu_start_timestamp
+ * Timestamp that indicates when the PPDU that contained this MPDU
+ * started on the medium.
+ *
+ * phy_meta_data
+ * SW programmed Meta data provided by the PHY. Can be used for SW
+ * to indicate the channel the device is on.
+ *
+ * toeplitz_hash_2_or_4
+ * Controlled by multiple RxOLE registers for TCP/UDP over
+ * IPv4/IPv6 - Either, Toeplitz hash computed over 2-tuple
+ * IPv4 or IPv6 src/dest addresses is reported; or, Toeplitz
+ * hash computed over 4-tuple IPv4 or IPv6 src/dest addresses
+ * and src/dest ports is reported. The Flow_id_toeplitz hash
+ * can also be reported here. Usually the hash reported here
+ * is the one used for hash-based REO routing (see use_flow_id_toeplitz_clfy
+ * in 'RXPT_CLASSIFY_INFO').
+ *
+ * sa
+ * Source MAC address
+ *
+ * first_mpdu
+ * Indicates the first MSDU of the PPDU. If both first_mpdu
+ * and last_mpdu are set in the MSDU then this is a not an
+ * A-MPDU frame but a stand alone MPDU. Interior MPDU in an
+ * A-MPDU shall have both first_mpdu and last_mpdu bits set to
+ * 0. The PPDU start status will only be valid when this bit
+ * is set.
+ *
+ * mcast_bcast
+ * Multicast / broadcast indicator. Only set when the MAC
+ * address 1 bit 0 is set indicating mcast/bcast and the BSSID
+ * matches one of the 4 BSSID registers. Only set when
+ * first_msdu is set.
+ *
+ * ast_index_not_found
+ * Only valid when first_msdu is set. Indicates no AST matching
+ * entries within the max search count.
+ *
+ * ast_index_timeout
+ * Only valid when first_msdu is set. Indicates an unsuccessful
+ * search in the address search table due to timeout.
+ *
+ * power_mgmt
+ * Power management bit set in the 802.11 header. Only set
+ * when first_msdu is set.
+ *
+ * non_qos
+ * Set if packet is not a non-QoS data frame. Only set when
+ * first_msdu is set.
+ *
+ * null_data
+ * Set if frame type indicates either null data or QoS null
+ * data format. Only set when first_msdu is set.
+ *
+ * mgmt_type
+ * Set if packet is a management packet. Only set when
+ * first_msdu is set.
+ *
+ * ctrl_type
+ * Set if packet is a control packet. Only set when first_msdu
+ * is set.
+ *
+ * more_data
+ * Set if more bit in frame control is set. Only set when
+ * first_msdu is set.
+ *
+ * eosp
+ * Set if the EOSP (end of service period) bit in the QoS
+ * control field is set. Only set when first_msdu is set.
+ *
+ * a_msdu_error
+ * Set if number of MSDUs in A-MSDU is above a threshold or if the
+ * size of the MSDU is invalid. This receive buffer will contain
+ * all of the remainder of MSDUs in this MPDU w/o decapsulation.
+ *
+ * order
+ * Set if the order bit in the frame control is set. Only
+ * set when first_msdu is set.
+ *
+ * wifi_parser_error
+ * Indicates that the WiFi frame has one of the following errors
+ *
+ * overflow_err
+ * RXPCU Receive FIFO ran out of space to receive the full MPDU.
+ * Therefore this MPDU is terminated early and is thus corrupted.
+ *
+ * This MPDU will not be ACKed.
+ *
+ * RXPCU might still be able to correctly receive the following
+ * MPDUs in the PPDU if enough fifo space became available in time.
+ *
+ * mpdu_length_err
+ * Set by RXPCU if the expected MPDU length does not correspond
+ * with the actually received number of bytes in the MPDU.
+ *
+ * tcp_udp_chksum_fail
+ * Indicates that the computed checksum (tcp_udp_chksum) did
+ * not match the checksum in the TCP/UDP header.
+ *
+ * ip_chksum_fail
+ * Indicates that the computed checksum did not match the
+ * checksum in the IP header.
+ *
+ * sa_idx_invalid
+ * Indicates no matching entry was found in the address search
+ * table for the source MAC address.
+ *
+ * da_idx_invalid
+ * Indicates no matching entry was found in the address search
+ * table for the destination MAC address.
+ *
+ * amsdu_addr_mismatch
+ * Indicates that an A-MSDU with 'from DS = 0' had an SA mismatching
+ * TA or an A-MDU with 'to DS = 0' had a DA mismatching RA
+ *
+ * rx_in_tx_decrypt_byp
+ * Indicates that RX packet is not decrypted as Crypto is busy
+ * with TX packet processing.
+ *
+ * encrypt_required
+ * Indicates that this data type frame is not encrypted even if
+ * the policy for this MPDU requires encryption as indicated in
+ * the peer table key type.
+ *
+ * directed
+ * MPDU is a directed packet which means that the RA matched
+ * our STA addresses. In proxySTA it means that the TA matched
+ * an entry in our address search table with the corresponding
+ * 'no_ack' bit is the address search entry cleared.
+ *
+ * buffer_fragment
+ * Indicates that at least one of the rx buffers has been
+ * fragmented. If set the FW should look at the rx_frag_info
+ * descriptor described below.
+ *
+ * mpdu_length_err
+ * Indicates that the MPDU was pre-maturely terminated
+ * resulting in a truncated MPDU. Don't trust the MPDU length
+ * field.
+ *
+ * tkip_mic_err
+ * Indicates that the MPDU Michael integrity check failed
+ *
+ * decrypt_err
+ * Indicates that the MPDU decrypt integrity check failed
+ *
+ * fcs_err
+ * Indicates that the MPDU FCS check failed
+ *
+ * flow_idx_timeout
+ * Indicates an unsuccessful flow search due to the expiring of
+ * the search timer.
+ *
+ * flow_idx_invalid
+ * flow id is not valid.
+ *
+ * decrypt_status_code
+ * Field provides insight into the decryption performed. Values
+ * are defined in enum %RX_DESC_DECRYPT_STATUS_CODE_*.
+ *
+ * rx_bitmap_not_updated
+ * Frame is received, but RXPCU could not update the receive bitmap
+ * due to (temporary) fifo constraints.
+ *
+ * msdu_done
+ * If set indicates that the RX packet data, RX header data, RX
+ * PPDU start descriptor, RX MPDU start/end descriptor, RX MSDU
+ * start/end descriptors and RX Attention descriptor are all
+ * valid. This bit must be in the last octet of the
+ * descriptor.
+ *
+ */
+
+/* TODO: Move to compact TLV approach
+ * By default these tlv's are not aligned to 128b boundary
+ * Need to remove unused qwords and make them compact/aligned
+ */
+struct hal_rx_desc_qcn9274 {
+ struct rx_msdu_end_qcn9274 msdu_end;
+ struct rx_mpdu_start_qcn9274 mpdu_start;
+ u8 msdu_payload[];
+} __packed;
+
+#define RX_BE_PADDING0_BYTES 8
+#define RX_BE_PADDING1_BYTES 8
+
+#define HAL_RX_BE_PKT_HDR_TLV_LEN 112
+
+struct rx_pkt_hdr_tlv {
+ __le64 tag;
+ __le64 phy_ppdu_id;
+ u8 rx_pkt_hdr[HAL_RX_BE_PKT_HDR_TLV_LEN];
+};
+
+struct hal_rx_desc_wcn7850 {
+ __le64 msdu_end_tag;
+ struct rx_msdu_end_qcn9274 msdu_end;
+ u8 rx_padding0[RX_BE_PADDING0_BYTES];
+ __le64 mpdu_start_tag;
+ struct rx_mpdu_start_qcn9274 mpdu_start;
+ struct rx_pkt_hdr_tlv pkt_hdr_tlv;
+ u8 msdu_payload[];
+};
+
+struct hal_rx_desc {
+ union {
+ struct hal_rx_desc_qcn9274 qcn9274;
+ struct hal_rx_desc_wcn7850 wcn7850;
+ } u;
+} __packed;
+
+#define MAX_USER_POS 8
+#define MAX_MU_GROUP_ID 64
+#define MAX_MU_GROUP_SHOW 16
+#define MAX_MU_GROUP_LENGTH (6 * MAX_MU_GROUP_SHOW)
+
+#define HAL_RX_RU_ALLOC_TYPE_MAX 6
+#define RU_26 1
+#define RU_52 2
+#define RU_106 4
+#define RU_242 9
+#define RU_484 18
+#define RU_996 37
+
+#endif /* ATH12K_RX_DESC_H */
