This patch fixes a slab-out-of-bounds read in brcmfmac that occurs in
cfg80211_find_elem_match() called from brcmf_inform_single_bss() when
the offset and length values of information elements provided by the
device exceed the boundary of the escan buffer that contains information
elements. The patch adds a check that makes the function return -EINVAL
if that is the case. Note that the negative return is handled by the
caller, brcmf_inform_bss().
Found by a modified version of syzkaller.
==================================================================
BUG: KASAN: slab-out-of-bounds in cfg80211_find_elem_match+0x164/0x180
Read of size 1 at addr ffff888018f0fde9 by task kworker/0:2/1896
CPU: 0 PID: 1896 Comm: kworker/0:2 Tainted: G O 5.14.0+ #139
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Workqueue: events brcmf_fweh_event_worker
Call Trace:
dump_stack_lvl+0x8e/0xd1
print_address_description.constprop.0.cold+0x93/0x334
? cfg80211_find_elem_match+0x164/0x180
kasan_report.cold+0x79/0xd5
? cfg80211_find_elem_match+0x164/0x180
cfg80211_find_elem_match+0x164/0x180
cfg80211_get_bss_channel+0x69/0x320
cfg80211_inform_single_bss_data+0x1a6/0x1060
? cfg80211_bss_update+0x1e20/0x1e20
? rcu_read_lock_sched_held+0xa1/0xd0
? rcu_read_lock_bh_held+0xb0/0xb0
? find_held_lock+0x2d/0x110
? cfg80211_inform_bss_data+0xcb/0x160
cfg80211_inform_bss_data+0xcb/0x160
? cfg80211_parse_mbssid_data+0x1540/0x1540
? kvm_clock_get_cycles+0x14/0x20
? ktime_get_with_offset+0x2b9/0x450
brcmf_inform_single_bss+0x36d/0x4d0
? brcmf_notify_mic_status+0xb0/0xb0
? __lock_acquire+0x181f/0x5790
? brcmf_p2p_cancel_remain_on_channel+0x30/0x30
brcmf_inform_bss+0x131/0x210
brcmf_cfg80211_escan_handler+0x779/0xd20
? rcu_read_lock_bh_held+0xb0/0xb0
? lock_acquire+0x19d/0x4e0
? find_held_lock+0x2d/0x110
? brcmf_cfg80211_escan_timeout_worker+0x60/0x60
? brcmf_fweh_event_worker+0x249/0xc00
? mark_held_locks+0x9f/0xe0
? lockdep_hardirqs_on_prepare+0x3e0/0x3e0
? brcmf_cfg80211_escan_timeout_worker+0x60/0x60
brcmf_fweh_call_event_handler.isra.0+0x90/0x100
brcmf_fweh_event_worker+0x117/0xc00
? brcmf_fweh_call_event_handler.isra.0+0x100/0x100
? rcu_read_lock_sched_held+0xa1/0xd0
? rcu_read_lock_bh_held+0xb0/0xb0
? lockdep_hardirqs_on_prepare+0x273/0x3e0
process_one_work+0x92b/0x1460
? pwq_dec_nr_in_flight+0x330/0x330
? rwlock_bug.part.0+0x90/0x90
worker_thread+0x95/0xe00
? __kthread_parkme+0x115/0x1e0
? process_one_work+0x1460/0x1460
kthread+0x3a1/0x480
? set_kthread_struct+0x120/0x120
ret_from_fork+0x1f/0x30
The buggy address belongs to the page:
page:ffffea000063c000 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x18f00
head:ffffea000063c000 order:4 compound_mapcount:0 compound_pincount:0
flags: 0x100000000010000(head|node=0|zone=1)
raw: 0100000000010000 0000000000000000 dead000000000122 0000000000000000
raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 4, migratetype Unmovable, gfp_mask 0x40dc0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO), pid 1896, ts 44510886600, free_ts 0
prep_new_page+0x1aa/0x240
get_page_from_freelist+0x159a/0x27c0
__alloc_pages+0x2da/0x6a0
alloc_pages+0xec/0x1e0
kmalloc_order+0x39/0xf0
kmalloc_order_trace+0x19/0x120
brcmf_cfg80211_attach+0x5c9/0x3fd0
brcmf_attach+0x389/0xd40
brcmf_usb_probe+0x12de/0x1690
usb_probe_interface+0x2aa/0x760
really_probe+0x205/0xb70
__driver_probe_device+0x311/0x4b0
driver_probe_device+0x4e/0x150
__device_attach_driver+0x1cc/0x2a0
bus_for_each_drv+0x156/0x1d0
__device_attach+0x23f/0x3a0
page_owner free stack trace missing
Memory state around the buggy address:
ffff888018f0fc80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff888018f0fd00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff888018f0fd80: 00 00 00 00 00 00 00 00 00 00 00 00 00 fe fe fe
^
ffff888018f0fe00: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe
ffff888018f0fe80: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe
==================================================================
Reported-by: Dokyung Song <dokyungs@xxxxxxxxxxxx>
Reported-by: Jisoo Jang <jisoo.jang@xxxxxxxxxxxx>
Reported-by: Minsuk Kang <linuxlovemin@xxxxxxxxxxxx>
Reported-by: kernel test robot <lkp@xxxxxxxxx>
Signed-off-by: Minsuk Kang <linuxlovemin@xxxxxxxxxxxx>
---
v1->v2: Use the correct format for size_t in bphy_err()
.../net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
index ae9507dec74a..2148027eb42b 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -3298,6 +3298,13 @@ static s32 brcmf_inform_single_bss(struct brcmf_cfg80211_info *cfg,
notify_ielen = le32_to_cpu(bi->ie_length);
bss_data.signal = (s16)le16_to_cpu(bi->RSSI) * 100;
+ if ((unsigned long)notify_ie + notify_ielen -
+ (unsigned long)cfg->escan_info.escan_buf > BRCMF_ESCAN_BUF_SIZE) {
+ bphy_err(drvr, "Invalid information element offset: %u, length: %zu\n",
+ le16_to_cpu(bi->ie_offset), notify_ielen);
+ return -EINVAL;
+ }
+
brcmf_dbg(CONN, "bssid: %pM\n", bi->BSSID);
brcmf_dbg(CONN, "Channel: %d(%d)\n", channel, freq);
brcmf_dbg(CONN, "Capability: %X\n", notify_capability);
--
2.25.1
