Use descriptive names instead of magic numbers. Suggested-by: Ping-Ke Shih <pkshih@xxxxxxxxxxx> Signed-off-by: Bitterblue Smith <rtl8821cerfe2@xxxxxxxxx> --- v2: - Change the commit message. --- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 10 +++++----- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h | 6 ++++++ 2 files changed, 11 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c index 839e0546f5ec..e4eb17d03cd7 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c @@ -3786,16 +3786,16 @@ void rtl8xxxu_init_burst(struct rtl8xxxu_priv *priv) * For USB high speed set 512B packets */ val8 = rtl8xxxu_read8(priv, REG_RXDMA_PRO_8723B); - val8 &= ~(BIT(4) | BIT(5)); - val8 |= BIT(4); - val8 |= BIT(1) | BIT(2) | BIT(3); + u8p_replace_bits(&val8, 1, RXDMA_PRO_DMA_BURST_SIZE); + u8p_replace_bits(&val8, 3, RXDMA_PRO_DMA_BURST_CNT); + val8 |= RXDMA_PRO_DMA_MODE; rtl8xxxu_write8(priv, REG_RXDMA_PRO_8723B, val8); /* * Enable single packet AMPDU */ val8 = rtl8xxxu_read8(priv, REG_HT_SINGLE_AMPDU_8723B); - val8 |= BIT(7); + val8 |= HT_SINGLE_AMPDU_ENABLE; rtl8xxxu_write8(priv, REG_HT_SINGLE_AMPDU_8723B, val8); rtl8xxxu_write16(priv, REG_MAX_AGGR_NUM, 0x0c14); @@ -3820,7 +3820,7 @@ void rtl8xxxu_init_burst(struct rtl8xxxu_priv *priv) /* to prevent mac is reseted by bus. */ val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL); - val8 |= BIT(5) | BIT(6); + val8 |= RSV_CTRL_WLOCK_1C | RSV_CTRL_DIS_PRST; rtl8xxxu_write8(priv, REG_RSV_CTRL, val8); } diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h index 04bf77959fba..5d4cac4f4c06 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h @@ -68,6 +68,8 @@ #define REG_SPS_OCP_CFG 0x0018 #define REG_8192E_LDOV12_CTRL 0x0014 #define REG_RSV_CTRL 0x001c +#define RSV_CTRL_WLOCK_1C BIT(5) +#define RSV_CTRL_DIS_PRST BIT(6) #define REG_RF_CTRL 0x001f #define RF_ENABLE BIT(0) @@ -472,6 +474,9 @@ /* Presumably only found on newer chips such as 8723bu */ #define REG_RX_DMA_CTRL_8723B 0x0286 #define REG_RXDMA_PRO_8723B 0x0290 +#define RXDMA_PRO_DMA_MODE BIT(1) /* Set to 0x1. */ +#define RXDMA_PRO_DMA_BURST_CNT GENMASK(3, 2) /* Set to 0x3. */ +#define RXDMA_PRO_DMA_BURST_SIZE GENMASK(5, 4) /* Set to 0x1. */ #define REG_RF_BB_CMD_ADDR 0x02c0 #define REG_RF_BB_CMD_DATA 0x02c4 @@ -577,6 +582,7 @@ #define REG_STBC_SETTING 0x04c4 #define REG_QUEUE_CTRL 0x04c6 #define REG_HT_SINGLE_AMPDU_8723B 0x04c7 +#define HT_SINGLE_AMPDU_ENABLE BIT(7) #define REG_PROT_MODE_CTRL 0x04c8 #define REG_MAX_AGGR_NUM 0x04ca #define REG_RTS_MAX_AGGR_NUM 0x04cb -- 2.38.0
