Add more unified command IDs which will be used in new chipset.
This is the preliminary patch for mt7996 support.
Signed-off-by: Shayne Chen <shayne.chen@xxxxxxxxxxxx>
---
.../wireless/mediatek/mt76/mt76_connac_mcu.h | 22 +++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
index 9cca73df6644..f8f974f36554 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
@@ -1172,10 +1172,32 @@ enum {
MCU_UNI_CMD_DEV_INFO_UPDATE = 0x01,
MCU_UNI_CMD_BSS_INFO_UPDATE = 0x02,
MCU_UNI_CMD_STA_REC_UPDATE = 0x03,
+ MCU_UNI_CMD_EDCA_UPDATE = 0x04,
MCU_UNI_CMD_SUSPEND = 0x05,
MCU_UNI_CMD_OFFLOAD = 0x06,
MCU_UNI_CMD_HIF_CTRL = 0x07,
+ MCU_UNI_CMD_BAND_CONFIG = 0x08,
+ MCU_UNI_CMD_REPT_MUAR = 0x09,
+ MCU_UNI_CMD_WSYS_CONFIG = 0x0b,
+ MCU_UNI_CMD_REG_ACCESS = 0x0d,
+ MCU_UNI_CMD_POWER_CREL = 0x0f,
+ MCU_UNI_CMD_RX_HDR_TRANS = 0x12,
+ MCU_UNI_CMD_SER = 0x13,
+ MCU_UNI_CMD_TWT = 0x14,
+ MCU_UNI_CMD_RDD_CTRL = 0x19,
+ MCU_UNI_CMD_GET_MIB_INFO = 0x22,
MCU_UNI_CMD_SNIFFER = 0x24,
+ MCU_UNI_CMD_SR = 0x25,
+ MCU_UNI_CMD_TXPOWER = 0x2b,
+ MCU_UNI_CMD_EFUSE_CTRL = 0x2d,
+ MCU_UNI_CMD_RA = 0x2f,
+ MCU_UNI_CMD_MURU = 0x31,
+ MCU_UNI_CMD_BF = 0x33,
+ MCU_UNI_CMD_CHANNEL_SWITCH = 0x34,
+ MCU_UNI_CMD_THERMAL = 0x35,
+ MCU_UNI_CMD_VOW = 0x37,
+ MCU_UNI_CMD_RRO = 0x57,
+ MCU_UNI_CMD_OFFCH_SCAN_CTRL = 0x58,
};
enum {
--
2.25.1
