During firmware recovery, the monitor interface is not getting created in the driver and firmware since the respective flags are not updated properly. So after firmware recovery is successful, when monitor interface is brought down manually, firmware assertion is observed, since we are trying to bring down the interface which is not yet created in the firmware. Fix this by updating the monitor flags properly per phy#, during firmware recovery. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Nagarajan Maran <quic_nmaran@xxxxxxxxxxx> --- v2: - added "wifi" to the patch title. --- drivers/net/wireless/ath/ath11k/core.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c index 35a5de3a0a8a..0ab2f190f1ec 100644 --- a/drivers/net/wireless/ath/ath11k/core.c +++ b/drivers/net/wireless/ath/ath11k/core.c @@ -1677,6 +1677,10 @@ void ath11k_core_pre_reconfigure_recovery(struct ath11k_base *ab) ath11k_mac_tx_mgmt_pending_free, ar); idr_destroy(&ar->txmgmt_idr); wake_up(&ar->txmgmt_empty_waitq); + + ar->monitor_vdev_id = -1; + clear_bit(ATH11K_FLAG_MONITOR_STARTED, &ar->monitor_flags); + clear_bit(ATH11K_FLAG_MONITOR_VDEV_CREATED, &ar->monitor_flags); } wake_up(&ab->wmi_ab.tx_credits_wq); -- 2.17.1
