Search Linux Wireless

Re: Suspend to RAM regression in 2.6.28-rc2 (bisected)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Oct 27, 2008 at 10:51 PM, Rafael J. Wysocki <rjw@xxxxxxx> wrote:
> On Monday, 27 of October 2008, Carlos R. Mafra wrote:
>> On Mon 27.Oct'08 at 20:13:43 +0100, Johannes Berg wrote:
>> > On Mon, 2008-10-27 at 20:11 +0100, Carlos R. Mafra wrote:
>> >
>> > > > Do you get any kernel messages output? If you do, could you put messages
>> > > > into each line of ieee80211_set_disassoc to see where it hangs?
>> > >
>> > > No messages appear, just a black screen.
>> > >
>> > > But I can use the SysRq keys, and when I umount the
>> > > screen shows the message that umount succeed. I also tried SysRq+t but
>> > > the messages appear to fast to read.
>> >
>> > Ok, but that means you _can_ get messages, it would help a lot if you
>> > could put a few printks into the set_disassoc function before/after each
>> > other function call, so we know where exactly it hangs. Pretty much all
>> > of them could possibly hang if there is some sort of locking error
>> > happening or anything relies on userspace to be running...
>>
>> Ok, I humbly tried to do that with the patch at the end of the email,
>> but I did not appear to hang in this function tough.
>>
>> Somehow I could get some messages printed when it was a black screen
>> before (I think it has to do with the debug level I set with SysRq...)
>> and I could see all the printks I've put there.
>>
>> The good thing is that I could get the complete syslog of the boot until
>> the it failed after suspending to RAM (in 2.6.28-rc2 with my debug patch
>> below applied). The last messages before the laptop become unresponsive
>> (except for the SysRq) were these ones:
>>
>> Oct 27 21:03:06 localhost kernel: Registered led device: iwl-phy0:radio
>> Oct 27 21:03:06 localhost kernel: Registered led device: iwl-phy0:assoc
>> Oct 27 21:03:06 localhost kernel: Registered led device: iwl-phy0:RX
>> Oct 27 21:03:06 localhost kernel: Registered led device: iwl-phy0:TX
>> Oct 27 21:03:06 localhost kernel: before rcu_read_lock
>> Oct 27 21:03:06 localhost kernel: before netif_tx_stop_all_queues
>> Oct 27 21:03:06 localhost kernel: before netif_carrier_off
>> Oct 27 21:03:06 localhost kernel: before ieee80211_sta
>> Oct 27 21:03:06 localhost kernel: inside sef_disconnected 1
>> Oct 27 21:03:06 localhost kernel: before ieee8021_led_assoc
>> Oct 27 21:03:06 localhost kernel: before ieee8021_sta_send_apinfo
>> Oct 27 21:03:06 localhost kernel: before sta_info_unlink
>> Oct 27 21:03:06 localhost kernel: before rcu_read_unlock
>> Oct 27 21:03:06 localhost kernel: before sta_info_destroy
>> Oct 27 21:03:06 localhost kernel: sd 0:0:0:0: [sda] Starting disk
>> Oct 27 21:03:06 localhost kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>> Oct 27 21:03:06 localhost kernel: ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded
>> Oct 27 21:03:06 localhost kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>> Oct 27 21:03:06 localhost kernel: ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded
>> Oct 27 21:03:06 localhost kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>> Oct 27 21:03:06 localhost kernel: ata1.00: configured for UDMA/100
>> Oct 27 21:03:06 localhost kernel: ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
>> Oct 27 21:03:06 localhost kernel: ata1: irq_stat 0x00000040, connection status changed
>> Oct 27 21:03:06 localhost kernel: ata1: hard resetting link
>> Oct 27 21:03:06 localhost kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>> Oct 27 21:03:06 localhost kernel: ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded
>> Oct 27 21:03:06 localhost kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>> Oct 27 21:03:06 localhost kernel: ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded
>> Oct 27 21:03:06 localhost kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>> Oct 27 21:03:06 localhost kernel: ata1.00: configured for UDMA/100
>> Oct 27 21:03:06 localhost kernel: ata1: EH complete
>> Oct 27 21:03:06 localhost kernel: sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
>> Oct 27 21:03:06 localhost kernel: sd 0:0:0:0: [sda] Write Protect is off
>> Oct 27 21:03:06 localhost kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>> Oct 27 21:03:06 localhost kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>> Oct 27 21:03:06 localhost kernel: sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
>> Oct 27 21:03:06 localhost kernel: sd 0:0:0:0: [sda] Write Protect is off
>> Oct 27 21:03:06 localhost kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>> Oct 27 21:03:06 localhost kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>> Oct 27 21:03:06 localhost kernel: Restarting tasks ... done.
>> Oct 27 21:03:07 localhost ifplugd(wlan0)[3182]: Link beat lost.
>> Oct 27 21:03:13 localhost ifplugd(wlan0)[3182]: Executing '/etc/ifplugd/ifplugd.action wlan0 down'.
>> Oct 27 21:06:20 localhost kernel: SysRq : Changing Loglevel
>> Oct 27 21:06:20 localhost kernel: Loglevel set to 4
>> Oct 27 21:06:22 localhost kernel: SysRq : Changing Loglevel
>> Oct 27 21:06:22 localhost kernel: Loglevel set to 6
>> Oct 27 21:06:32 localhost kernel: ffff80251670>] ? autoremove_wake_function+0x0/0x40
>> Oct 27 21:06:32 localhost kernel:  [<ffffffff8024e200>] ? worker_thread+0x0/0x110
>> Oct 27 21:06:32 localhost kernel:  [<ffffffff8025119d>] kthread+0x4d/0x80
>> Oct 27 21:06:32 localhost kernel:  [<ffffffff8020d1b9>] child_rip+0xa/0x11
>>
>> and I have the complete trace also. I can try to put it somewhere in the web if it helps
>> (I already tried it, but I am new at the institute here and I could not set up my
>> webpage yet :-(
>
> Please attach it to http://bugzilla.kernel.org/show_bug.cgi?id=11845 .

Can someone try this one (it might be space broken I've just pasted
that in) It's on top of 1d63e726408dfdb3e10ed8f00c383b30ebb333d3
(latest linux-2.6.git)

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c
b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 24a1aeb..321dbc8 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -2090,7 +2090,6 @@ static void iwl_alive_start(struct iwl_priv *priv)
                iwl4965_error_recovery(priv);

        iwl_power_update_mode(priv, 1);
-       ieee80211_notify_mac(priv->hw, IEEE80211_NOTIFY_RE_ASSOC);

        if (test_and_clear_bit(STATUS_MODE_PENDING, &priv->status))
                iwl4965_set_mode(priv, priv->iw_mode);
@@ -2342,6 +2341,7 @@ static void iwl_bg_alive_start(struct work_struct *data)
        mutex_lock(&priv->mutex);
        iwl_alive_start(priv);
        mutex_unlock(&priv->mutex);
+       ieee80211_notify_mac(priv->hw, IEEE80211_NOTIFY_RE_ASSOC);
 }

 static void iwl4965_bg_rf_kill(struct work_struct *work)


Thanks
Tomas
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux