Search Linux Wireless

Re: [PATCH v2 1/2] wifi: ath11k: change to set 11d state instead of start 11d scan while disconnect

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Wen Gong <quic_wgong@xxxxxxxxxxx> wrote:

> When switch to connect to a new AP for station which is already connected
> to an AP, the time cost is too long, it arrives 10 seconds.
> 
> The reason is when switch connection, disconnect operation happened on
> the 1st AP, then 11d scan start command sent to firmware, and then a
> new hw scan arrived for the 2nd AP. The 11d scan is running at this
> moment, so the hw scan can not start immediately, it needs to wait
> the 11d scan finished, it increased the time cost of switch AP and
> even happened scan fail as log below after apply the incoming patch.
> 
> [ 1194.815104] ath11k_pci 0000:06:00.0: failed to start hw scan: -110
> [ 1196.864157] ath11k_pci 0000:06:00.0: failed to start hw scan: -110
> [ 1198.911926] ath11k_pci 0000:06:00.0: failed to start hw scan: -110
> 
> Change to set 11d state while disconnect, and the 11d scan will be
> started after the new hw scan in ath11k_mac_op_hw_scan(). Then the
> time cost of switching AP is small and not happened scan fail.
> 
> Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3
> 
> Fixes: 9dcf6808b253 ("ath11k: add 11d scan offload support")
> Signed-off-by: Wen Gong <quic_wgong@xxxxxxxxxxx>
> Signed-off-by: Kalle Valo <quic_kvalo@xxxxxxxxxxx>

I still see warnings:

[ 3627.691737] ath11k_pci 0000:06:00.0: failed to start hw scan: -110
[ 3715.435608] ath11k_pci 0000:06:00.0: failed to start hw scan: -110
[ 3860.333214] ath11k_pci 0000:06:00.0: failed to start hw scan: -110
[ 4542.000955] ath11k_pci 0000:06:00.0: failed to start hw scan: -110
[ 4604.018451] ath11k_pci 0000:06:00.0: failed to start hw scan: -110

2 patches set to Changes Requested.

12991768 [v2,1/2] wifi: ath11k: change to set 11d state instead of start 11d scan while disconnect
12991769 [v2,2/2] wifi: ath11k: reduce the timeout value back for hw scan from 10 seconds to 1 second

-- 
https://patchwork.kernel.org/project/linux-wireless/patch/20220928081413.27339-2-quic_wgong@xxxxxxxxxxx/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux