Search Linux Wireless

Re: [PATCH v3] ath9k: verify the expected usb_endpoints are present

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Fedor Pchelkin <pchelkin@xxxxxxxxx> writes:

> The bug arises when a USB device claims to be an ATH9K but doesn't
> have the expected endpoints. (In this case there was an interrupt
> endpoint where the driver expected a bulk endpoint.) The kernel
> needs to be able to handle such devices without getting an internal error.
>
> usb 1-1: BOGUS urb xfer, pipe 3 != type 1
> WARNING: CPU: 3 PID: 500 at drivers/usb/core/urb.c:493 usb_submit_urb+0xce2/0x1430 drivers/usb/core/urb.c:493
> Modules linked in:
> CPU: 3 PID: 500 Comm: kworker/3:2 Not tainted 5.10.135-syzkaller #0
> Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
> Workqueue: events request_firmware_work_func
> RIP: 0010:usb_submit_urb+0xce2/0x1430 drivers/usb/core/urb.c:493
> Call Trace:
>  ath9k_hif_usb_alloc_rx_urbs drivers/net/wireless/ath/ath9k/hif_usb.c:908 [inline]
>  ath9k_hif_usb_alloc_urbs+0x75e/0x1010 drivers/net/wireless/ath/ath9k/hif_usb.c:1019
>  ath9k_hif_usb_dev_init drivers/net/wireless/ath/ath9k/hif_usb.c:1109 [inline]
>  ath9k_hif_usb_firmware_cb+0x142/0x530 drivers/net/wireless/ath/ath9k/hif_usb.c:1242
>  request_firmware_work_func+0x12e/0x240 drivers/base/firmware_loader/main.c:1097
>  process_one_work+0x9af/0x1600 kernel/workqueue.c:2279
>  worker_thread+0x61d/0x12f0 kernel/workqueue.c:2425
>  kthread+0x3b4/0x4a0 kernel/kthread.c:313
>  ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:299
>
> Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
>
> Suggested-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
> Signed-off-by: Fedor Pchelkin <pchelkin@xxxxxxxxx>
> Signed-off-by: Alexey Khoroshilov <khoroshilov@xxxxxxxxx>
> ---
> v1->v2: use reverse x-mas tree ordering of the variable definitions
> v2->v3: fix tab
>
>  drivers/net/wireless/ath/ath9k/hif_usb.c | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
>
> diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
> index 4d9002a9d082..7bbbeb411056 100644
> --- a/drivers/net/wireless/ath/ath9k/hif_usb.c
> +++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
> @@ -1329,10 +1329,24 @@ static int send_eject_command(struct usb_interface *interface)
>  static int ath9k_hif_usb_probe(struct usb_interface *interface,
>  			       const struct usb_device_id *id)
>  {
> +	struct usb_endpoint_descriptor *bulk_in, *bulk_out, *int_in, *int_out;
>  	struct usb_device *udev = interface_to_usbdev(interface);
> +	struct usb_host_interface *alt;
>  	struct hif_device_usb *hif_dev;
>  	int ret = 0;
>     

Hmm, so your patch has spaces in this empty line which are not in the
actual source file, which causes 'git am' to choke on the patch... :(

Not sure what is causing this, but could you please see if you can fix
it and resend?

-Toke



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux