When 802.3 decap offload is enabled, the hardware indicates header translation
failure, whenever either the LLC-SNAP header was not found, or a VLAN header
with an unregcognized tag is present.
In that case, the hardware inserts a 2-byte length fields after the MAC
addresses. For VLAN packets, this tag needs to be removed. However,
for 802.3 LLC packets, the length bytes should be preserved, since there
is no separate ethertype field in the data.
This fixes an issue where the length field was omitted for LLC frames, causing
them to be malformed after hardware decap.
Fixes: 1eeff0b4c1a6 ("mt76: mt7915: fix decap offload corner case with 4-addr VLAN frames")
Reported-by: Chad Monroe <chad.monroe@xxxxxxxxxxx>
Signed-off-by: Felix Fietkau <nbd@xxxxxxxx>
---
drivers/net/wireless/mediatek/mt76/mt7615/mac.c | 8 ++++----
drivers/net/wireless/mediatek/mt76/mt7915/mac.c | 8 ++++----
2 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
index d6aae60c440d..cbc6859e38ac 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
@@ -610,14 +610,14 @@ static int mt7615_mac_fill_rx(struct mt7615_dev *dev, struct sk_buff *skb)
* When header translation failure is indicated,
* the hardware will insert an extra 2-byte field
* containing the data length after the protocol
- * type field.
+ * type field. This happens either when the LLC-SNAP
+ * pattern did not match, or if a VLAN header was
+ * detected.
*/
pad_start = 12;
if (get_unaligned_be16(skb->data + pad_start) == ETH_P_8021Q)
pad_start += 4;
-
- if (get_unaligned_be16(skb->data + pad_start) !=
- skb->len - pad_start - 2)
+ else
pad_start = 0;
}
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
index 1070838e7e16..ec996a587142 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
@@ -446,14 +446,14 @@ mt7915_mac_fill_rx(struct mt7915_dev *dev, struct sk_buff *skb)
* When header translation failure is indicated,
* the hardware will insert an extra 2-byte field
* containing the data length after the protocol
- * type field.
+ * type field. This happens either when the LLC-SNAP
+ * pattern did not match, or if a VLAN header was
+ * detected.
*/
pad_start = 12;
if (get_unaligned_be16(skb->data + pad_start) == ETH_P_8021Q)
pad_start += 4;
-
- if (get_unaligned_be16(skb->data + pad_start) !=
- skb->len - pad_start - 2)
+ else
pad_start = 0;
}
--
2.36.1
