From: Ching-Te Ku <ku920601@xxxxxxxxxxx>
WiFi/BT combo module could only have two antenna, namely WL_S0 and WL_S1.
WiFi can use two antenna to TX/RX 2SS data, and BT can share one of the
antenna. This patch is to allow WiFi to TX/RX 1SS data like ACK/RTS/CTS to
improve Wi-Fi performance while coexisting with Bluetooth.
Signed-off-by: Ching-Te Ku <ku920601@xxxxxxxxxxx>
Signed-off-by: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
---
drivers/net/wireless/realtek/rtw89/rtw8852a.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/wireless/realtek/rtw89/rtw8852a.c b/drivers/net/wireless/realtek/rtw89/rtw8852a.c
index a2d0f2e2794e5..c6c92a2a16134 100644
--- a/drivers/net/wireless/realtek/rtw89/rtw8852a.c
+++ b/drivers/net/wireless/realtek/rtw89/rtw8852a.c
@@ -1843,6 +1843,9 @@ static void rtw8852a_btc_init_cfg(struct rtw89_dev *rtwdev)
RF_PATH_A, BTC_BT_SS_GROUP, 0x5ff);
rtw8852a_set_trx_mask(rtwdev,
RF_PATH_B, BTC_BT_SS_GROUP, 0x5ff);
+ /* set path-A(S0) Tx/Rx no-mask if GNT_WL=0 && BT_S1=tx group */
+ rtw8852a_set_trx_mask(rtwdev,
+ RF_PATH_A, BTC_BT_TX_GROUP, 0x5ff);
} else { /* set WL Tx stb if GNT_WL = 0 && BT_S1 = ss group for 3-ant */
rtw8852a_set_trx_mask(rtwdev,
RF_PATH_A, BTC_BT_SS_GROUP, 0x5df);
--
2.25.1
